About Fairview Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fairview: Labette County Fire 154.8450 MHz, narrow FM, 192.8 PL. County-level ems dispatch that covers Fairview: Labette County EMS 151.0700 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Labette County Fire talkgroup 2107 (hex 83b).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fairview, start with the Altamont site of Kansas Statewide Interoperable Communication System (KSICS), about 4 miles away. Its control channels: 851.9375, 852.15 MHz.
Data updated .
Labette County channels that also cover Fairview
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Labette County Fire | Labette County Fire – Dispatch | 154.8450 | 192.8 PL | FMN | WNQM782 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Labette County Fire | Fire and EMS – Backup Dispatch and Car-to-Car | 155.2800 | FMN | KNFA292 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Labette County EMS | Labette County EMS Dispatch | 151.0700 In 153.8900 | 192.8 PL | FMN | WPWX348 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Parsons State Hospital and Training Center | Hospital Security and Paging | 155.3250 | 192.8 PL | FMN | KGW757 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Labette County Fire | Fire and EMS Dispatch | 2107 | 83b | D |
| Labette County Fire | Fire and EMS West Operations | 2108 | 83c | D |
| Labette County Fire | Fire and EMS East Operations | 2109 | 83d | D |
| Labette County EMS | EMS Administration | 2112 | 840 | D |
| Labette County Hospital | Hospital Emergency Room – EMS Patient Reports | 2113 | 841 | D |
Nearest trunked radio sites
Distances are measured from the center of Fairview.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fairview?
We do not have a fire dispatch channel listed specifically for Fairview. The county-level fire dispatch channels in the same county: Labette County Fire 154.8450 MHz, narrow FM, 192.8 PL.
What frequency does EMS or the ambulance service use in Fairview?
We do not have a EMS dispatch channel listed specifically for Fairview. The county-level EMS dispatch channels in the same county: Labette County EMS 151.0700 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Fairview?
Yes. The county-level systems that cover Fairview are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fairview?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fairview?
For Fairview, start with the Altamont site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.9375, 852.15 MHz. Program a control channel first; the scanner finds the voice channels from it.