Skip to content

Battle Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Battle Creek in Lincoln County, Kansas yet. Countywide channels for Lincoln County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Beloit (Kansas Statewide Interoperable Communication System (KSICS)), about 13 miles away.

About Battle Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Battle Creek: Lincoln County Fire 154.1300 MHz, narrow FM, CSQ. County-level ems dispatch that covers Battle Creek: Lincoln County EMS 155.8650 MHz, narrow FM, 156.7 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lincoln County channels that also cover Battle Creek

Fire Dispatch

Fire Dispatch frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County FireLincoln County Fire – Dispatch154.1300CSQFMNKSI980
Lincoln County FirePolice and Fire Dispatch156.2100
In 154.0250
FMNKOM782

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County FireFire Command458.0625FMNWNKP436
Lincoln County FireFire Command458.1625FMNWNKP436
Lincoln County FireFire Command458.3875FMNWNKP436
Lincoln County FireFire Command458.4625FMNWNKP436

EMS Dispatch

EMS Dispatch frequencies for Lincoln County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lincoln County EMSLincoln County EMS – Dispatch155.8650
In 153.8450
156.7 PLFMNWNKP436

Nearest trunked radio sites

Distances are measured from the center of Battle Creek.

Beloit · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 23 (hex 17) · NAC 1B1 · about 13 mi away
Control 852.3125, 852.6125
Voice 851.325, 852.9375, 853.1875, 853.65
Ellsworth · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 24 (hex 18) · NAC 1BE · about 22 mi away
Control 851.55, 851.7625
Voice 851.1875, 852.3375, 853.175, 853.6125
Osborne · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 25 (hex 19) · NAC 1B7 · about 34 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Battle Creek?

We do not have a fire dispatch channel listed specifically for Battle Creek. The county-level fire dispatch channels in the same county: Lincoln County Fire 154.1300 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Battle Creek?

We do not have a EMS dispatch channel listed specifically for Battle Creek. The county-level EMS dispatch channels in the same county: Lincoln County EMS 155.8650 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Battle Creek?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Battle Creek?

For Battle Creek, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.