Skip to content

Elmendaro Fire and EMS Frequencies

We do not have frequencies listed specifically for Elmendaro in Lyon County, Kansas yet. Countywide channels for Lyon County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Olpe (Kansas Statewide Interoperable Communication System (KSICS)), about 7 miles away.

About Elmendaro Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elmendaro: Lyon County Fire 453.0250 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Lyon County Fire talkgroup 5046 (hex 13b6).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Elmendaro, start with the Olpe site of Kansas Statewide Interoperable Communication System (KSICS), about 7 miles away. Its control channels: 856.4625, 856.7125 MHz.

Data updated .

Lyon County channels that also cover Elmendaro

Fire Dispatch

Fire Dispatch frequencies for Lyon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lyon County FireLyon County Fire – Dispatch453.0250
In 458.0250
192.8 PLFMNWPMK898

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Lyon County FireCounty Fire Dispatch504613b6D
Lyon County FireCounty Fire Tactical504713b7D
Lyon County FireLyon County Fire – Tactical Channel504813b8D

Nearest trunked radio sites

Distances are measured from the center of Elmendaro.

Olpe · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 50 (hex 32) · NAC 1B0 · about 7 mi away
Control 856.4625, 856.7125
Voice 854.9625, 857.2625, 857.9375, 858.2625
Lyon County · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 51 (hex 33) · NAC 1B1 · about 13 mi away
Control 857.4375, 857.7125
Voice 856.0375, 858.4375, 858.7125, 858.9625
Emporia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 49 (hex 31) · NAC 1B9 · about 15 mi away
Control 855.4625, 855.7375
Voice 855.2125, 855.9875, 856.2625, 856.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elmendaro?

We do not have a fire dispatch channel listed specifically for Elmendaro. The county-level fire dispatch channels in the same county: Lyon County Fire 453.0250 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Elmendaro?

Yes. The county-level systems that cover Elmendaro are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Elmendaro?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Elmendaro?

For Elmendaro, start with the Olpe site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.4625, 856.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.