Skip to content

Pike Fire and EMS Frequencies

We do not have frequencies listed specifically for Pike in Lyon County, Kansas yet. Countywide channels for Lyon County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Emporia (Kansas Statewide Interoperable Communication System (KSICS)), about 3 miles away.

About Pike Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pike: Lyon County Fire 453.0250 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Lyon County Fire talkgroup 5046 (hex 13b6).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pike, start with the Emporia site of Kansas Statewide Interoperable Communication System (KSICS), about 3 miles away. Its control channels: 855.4625, 855.7375 MHz.

Data updated .

Lyon County channels that also cover Pike

Fire Dispatch

Fire Dispatch frequencies for Lyon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lyon County FireLyon County Fire – Dispatch453.0250
In 458.0250
192.8 PLFMNWPMK898

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Lyon County FireCounty Fire Dispatch504613b6D
Lyon County FireCounty Fire Tactical504713b7D
Lyon County FireLyon County Fire – Tactical Channel504813b8D

Nearest trunked radio sites

Distances are measured from the center of Pike.

Emporia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 49 (hex 31) · NAC 1B9 · about 3 mi away
Control 855.4625, 855.7375
Voice 855.2125, 855.9875, 856.2625, 856.9625
Lyon County · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 51 (hex 33) · NAC 1B1 · about 12 mi away
Control 857.4375, 857.7125
Voice 856.0375, 858.4375, 858.7125, 858.9625
Reading · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 5 (hex 5) · NAC 1BB · about 13 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pike?

We do not have a fire dispatch channel listed specifically for Pike. The county-level fire dispatch channels in the same county: Lyon County Fire 453.0250 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Pike?

Yes. The county-level systems that cover Pike are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pike?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pike?

For Pike, start with the Emporia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 855.4625, 855.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.