About Durham Park Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Durham Park: County Fire District 7 (Tampa) 453.2500 MHz, narrow FM, 411 DPL. County-level ems dispatch that covers Durham Park: Marion County EMS 460.4250 MHz, narrow FM, 146.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Marion County Fire talkgroup 4915 (hex 1333).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Durham Park, start with the Aulne site of Kansas Statewide Interoperable Communication System (KSICS), about 15 miles away. Its control channels: 852.3125, 852.6125 MHz.
Data updated .
Marion County channels that also cover Durham Park
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire District 7 (Tampa) | Tampa Fire | 453.2500 In 458.2500 | 411 DPL | FMN | WQAW714 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marion County EMS | Marion County EMS – Dispatch | 460.4250 In 465.4250 | 146.2 PL | FMN | WNNJ304 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Marion County Fire | Marion County Fire – Dispatch | 4915 | 1333 | D |
| Marion County Fire | County Fire | 4922 | 133a | D |
| Marion County Fire | Fire Operations | 4924 | 133c | D |
| Marion County Fire | Marion County Fire – Tactical Channel | 4944 | 1350 | D |
| Marion County EMS | Marion County EMS – Dispatch | 4928 | 1340 | D |
| Marion County EMS | Marion County EMS – Tactical Channel | 4931 | 1343 | D |
Nearest trunked radio sites
Distances are measured from the center of Durham Park.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Durham Park?
We do not have a fire dispatch channel listed specifically for Durham Park. The county-level fire dispatch channels in the same county: County Fire District 7 (Tampa) 453.2500 MHz, narrow FM, 411 DPL.
What frequency does EMS or the ambulance service use in Durham Park?
We do not have a EMS dispatch channel listed specifically for Durham Park. The county-level EMS dispatch channels in the same county: Marion County EMS 460.4250 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Durham Park?
Yes. The county-level systems that cover Durham Park are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Durham Park?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Durham Park?
For Durham Park, start with the Aulne site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.