About Smoky Hill Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Smoky Hill: McPherson County Fire 154.4000 MHz, narrow FM, CSQ. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example McPherson County Fire talkgroup 4954 (hex 135a).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 8 talkgroups; McPherson County P25 (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Smoky Hill, start with the McPherson site of Kansas Statewide Interoperable Communication System (KSICS), about 9 miles away. Its control channels: 852.2375, 852.9 MHz.
Data updated .
McPherson County channels that also cover Smoky Hill
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McPherson County Fire | Fire Page Out | 154.4000 In 156.1050 | CSQ | FMN | KNIP537 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| McPherson County Fire | City / County Fire Dispatch | 4954 | 135a | D |
| McPherson County Fire | County Fire Tactical | 4956 | 135c | D |
| McPherson County Fire | County Fire | 4958 | 135e | D |
| McPherson County Fire | County Fire | 4959 | 135f | D |
| McPherson County Fire | County Fire | 4960 | 1360 | D |
| McPherson County Fire | County Fire | 4961 | 1361 | D |
| McPherson County Fire | County Fire Operations | 4962 | 1362 | D |
| McPherson County Fire | County Fire | 4963 | 1363 | D |
McPherson County P25
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| McPherson County Fire | McPherson County Fire – Dispatch | 4002 | fa2 | T |
| McPherson County EMS | McPherson County EMS – Dispatch | 6001 | 1771 | T |
Nearest trunked radio sites
Distances are measured from the center of Smoky Hill.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Smoky Hill?
We do not have a fire dispatch channel listed specifically for Smoky Hill. The county-level fire dispatch channels in the same county: McPherson County Fire 154.4000 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Smoky Hill?
Yes. The county-level systems that cover Smoky Hill are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 8 talkgroups; McPherson County P25 (Project 25): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Smoky Hill?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Smoky Hill?
For Smoky Hill, start with the McPherson site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.