Skip to content

Valley Fire and EMS Frequencies

We do not have frequencies listed specifically for Valley in Miami County, Kansas yet. Countywide channels for Miami County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Miami County Simulcast (Kansas Statewide Interoperable Communication System (KSICS)), about 4 miles away.

About Valley Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Valley: Miami County Fire 154.3100 MHz, narrow FM, 114.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Miami County Fire talkgroup 2914 (hex b62).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 9 talkgroups; Metropolitan Area Regional Radio System (MARRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Valley, start with the Miami County Simulcast site of Kansas Statewide Interoperable Communication System (KSICS), about 4 miles away. Its control channels: 854.8875, 855.8125 MHz.

Data updated .

Miami County channels that also cover Valley

Fire Dispatch

Fire Dispatch frequencies for Miami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Miami County FireMiami County Fire – Dispatch154.3100
In 155.4000
114.8 PLFMNWNWE911

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Miami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Miami County FireMiami County Fire – Fire Ground154.3400FMNWNNY931
Miami County FireMiami County Fire – South155.0250
In 158.8650
FMNWQWA982

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Miami County FireMiami County Fire – Dispatch2914b62D
Miami County FireMiami County Fire – Tactical Channel2083823D
Miami County FireMiami County Fire – Tactical Channel2084824D
Miami County FireMiami County Fire – Tactical Channel2085825D
Miami County FireFire Operations2915b63D
Miami County FireMiami County Fire – Tactical Channel2916b64D
Miami County EMSMiami County EMS – Dispatch6752a3D
Miami County EMSEMS Operations6762a4D
Miami County HospitalHospital ER – Patient Reports6792a7D

Metropolitan Area Regional Radio System (MARRS)

Metropolitan Area Regional Radio System (MARRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Miami County KSCounty Fire and EMS Dispatch3119079d6D

Nearest trunked radio sites

Distances are measured from the center of Valley.

Miami County Simulcast · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 56 (hex 38) · NAC 1B6 · about 4 mi away
Control 854.8875, 855.8125
Voice 854.3125, 858.7875, 859.3625, 859.7875
Paola · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 6 (hex 6) · NAC 1B4 · about 9 mi away
Control 851.575, 851.9375
Voice 851.2, 852.2875, 853.175, 853.6125
Rantoul · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 51 (hex 33) · NAC 1B1 · about 16 mi away
Control 856.6375, 857.5375
Voice 856.0625, 856.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Valley?

We do not have a fire dispatch channel listed specifically for Valley. The county-level fire dispatch channels in the same county: Miami County Fire 154.3100 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Valley?

Yes. The county-level systems that cover Valley are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 9 talkgroups; Metropolitan Area Regional Radio System (MARRS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Valley?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Valley?

For Valley, start with the Miami County Simulcast site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 854.8875, 855.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.