Skip to content

Fawn Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Fawn Creek in Montgomery County, Kansas yet. Countywide channels for Montgomery County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Independence (Kansas Statewide Interoperable Communication System (KSICS)), about 13 miles away.

About Fawn Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fawn Creek: Montgomery County Fire 155.2350 MHz, narrow FM, 156.7 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Montgomery County channels that also cover Fawn Creek

Fire Dispatch

Fire Dispatch frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County FireMontgomery County Fire – Dispatch155.2350156.7 PLFMNKNDY252

Nearest trunked radio sites

Distances are measured from the center of Fawn Creek.

Independence · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 4 (hex 4) · NAC 1B5 · about 13 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
Altamont · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 41 (hex 29) · NAC 1B1 · about 25 mi away
Control 851.9375, 852.15
Voice 851.7875, 852.425, 852.825, 853.55
Sedan · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 8 (hex 8) · NAC 1B9 · about 31 mi away
Control 851.7125, 852.4875
Voice 852.775, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fawn Creek?

We do not have a fire dispatch channel listed specifically for Fawn Creek. The county-level fire dispatch channels in the same county: Montgomery County Fire 155.2350 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Fawn Creek?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Fawn Creek?

For Fawn Creek, start with the Independence site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.