About Highland Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Highland: Dunlap Rural Fire - County Fire District 9 453.9000 MHz, narrow FM, no tone; Morris County Fire 154.7850 MHz, narrow FM, 107.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Morris County Fire talkgroup 4841 (hex 12e9).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Highland, start with the Herington site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 856.7375, 856.95 MHz.
Data updated .
Morris County channels that also cover Highland
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dunlap Rural Fire - County Fire District 9 | Dunlap Rural Fire – County Fire District 9 – Dispatch | 453.9000 In 458.9000 | FMN | WNUA287 | |
| Morris County Fire | Morris County Fire – Dispatch | 154.7850 In 156.0300 | 107.2 PL | FMN | WPSQ854 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morris County Fire | Morris County Fire – Tactical Channel | 155.2500 | FMN | WPSQ854 | |
| Morris County Fire | Morris County Fire – Tactical Channel | 155.6850 | FMN | WPSQ854 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Morris County Fire | County Fire Operations | 4841 | 12e9 | D |
| Morris County EMS | Morris County EMS – Dispatch | 4838 | 12e6 | D |
Nearest trunked radio sites
Distances are measured from the center of Highland.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Highland?
We do not have a fire dispatch channel listed specifically for Highland. The county-level fire dispatch channels in the same county: Dunlap Rural Fire - County Fire District 9 453.9000 MHz, narrow FM, no tone; Morris County Fire 154.7850 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Highland?
Yes. The county-level systems that cover Highland are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Highland?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Highland?
For Highland, start with the Herington site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.7375, 856.95 MHz. Program a control channel first; the scanner finds the voice channels from it.