Skip to content

Canville Fire and EMS Frequencies

We do not have frequencies listed specifically for Canville in Neosho County, Kansas yet. Countywide channels for Neosho County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Buffalo (Kansas Statewide Interoperable Communication System (KSICS)), about 11 miles away.

About Canville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Canville: Neosho County Fire 158.8350 MHz, narrow FM, 94.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Neosho County EMS talkgroup 654 (hex 28e).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Canville, start with the Buffalo site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 852.4625, 852.725 MHz.

Data updated .

Neosho County channels that also cover Canville

Fire Dispatch

Fire Dispatch frequencies for Neosho County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Neosho County FireNeosho County Fire – Dispatch / Storm Watch / Erie Police158.8350
In 153.8000
94.8 PLFMNKNBD589
Neosho County FireNeosho County Fire – Earlton158.8350
In 153.8000
85.4 PLFMNKNBD589

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Neosho County EMSNeosho County EMS – Dispatch65428eD

Nearest trunked radio sites

Distances are measured from the center of Canville.

Buffalo · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 3 (hex 3) · NAC 1B0 · about 11 mi away
Control 852.4625, 852.725
Voice 851.8375, 852.975, 853.4, 853.8625
Greenbush · Crawford County Public Safety
Site 1 (hex 1) · about 26 mi away
Control 151.0175, 151.4825, 154.205
Altamont · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 41 (hex 29) · NAC 1B1 · about 33 mi away
Control 851.9375, 852.15
Voice 851.7875, 852.425, 852.825, 853.55
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Canville?

We do not have a fire dispatch channel listed specifically for Canville. The county-level fire dispatch channels in the same county: Neosho County Fire 158.8350 MHz, narrow FM, 94.8 PL.

Do fire departments and EMS use a trunked radio system in Canville?

Yes. The county-level systems that cover Canville are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Canville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Canville?

For Canville, start with the Buffalo site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4625, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.