About Mission Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Mission: Neosho County Fire 158.8350 MHz, narrow FM, 94.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Neosho County EMS talkgroup 654 (hex 28e).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mission, start with the Greenbush site of Crawford County Public Safety, about 9 miles away. Its control channels: 151.0175, 151.4825, 154.205 MHz.
Data updated .
Neosho County channels that also cover Mission
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Neosho County Fire | Neosho County Fire – Dispatch / Storm Watch / Erie Police | 158.8350 In 153.8000 | 94.8 PL | FMN | KNBD589 |
| Neosho County Fire | Neosho County Fire – Earlton | 158.8350 In 153.8000 | 85.4 PL | FMN | KNBD589 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Neosho County EMS | Neosho County EMS – Dispatch | 654 | 28e | D |
Nearest trunked radio sites
Distances are measured from the center of Mission.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Mission?
We do not have a fire dispatch channel listed specifically for Mission. The county-level fire dispatch channels in the same county: Neosho County Fire 158.8350 MHz, narrow FM, 94.8 PL.
Do fire departments and EMS use a trunked radio system in Mission?
Yes. The county-level systems that cover Mission are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mission?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mission?
For Mission, start with the Greenbush site of Crawford County Public Safety. Its control channels are 151.0175, 151.4825, 154.205 MHz. Program a control channel first; the scanner finds the voice channels from it.