Skip to content

Highland-District 2 Fire and EMS Frequencies

We do not have frequencies listed specifically for Highland-District 2 in Norton County, Kansas yet. Countywide channels for Norton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Norton (Kansas Statewide Interoperable Communication System (KSICS)), about 7 miles away.

About Highland-District 2 Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Highland-District 2: Norton County Fire 155.4300 MHz, narrow FM, 107.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Norton County Fire talkgroup 4416 (hex 1140).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Highland-District 2, start with the Norton site of Kansas Statewide Interoperable Communication System (KSICS), about 7 miles away. Its control channels: 852.4875, 852.775 MHz.

Data updated .

Norton County channels that also cover Highland-District 2

Fire Dispatch

Fire Dispatch frequencies for Norton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Norton County FireSheriff, Fire and EMS (before KSICS)155.4300
In 159.0300
107.2 PLFMNWQAB588

Hospitals & Medical

Hospitals & Medical frequencies for Norton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Norton County HospitalNorton County Hospital – Dispatch155.2650
In 150.8050
FMNKWM637

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Norton County FireNorton County Fire – Dispatch44161140D
Norton County FireNorton County Fire – Tactical Channel44171141D
Norton County FireNorton County Fire – Tactical Channel44181142D
Norton County EMSNorton County EMS – Dispatch44221146D

Nearest trunked radio sites

Distances are measured from the center of Highland-District 2.

Norton · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 33 (hex 21) · about 7 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Morland · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 32 (hex 20) · NAC 1B7 · about 23 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
Oberlin · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 34 (hex 22) · about 33 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Highland-District 2?

We do not have a fire dispatch channel listed specifically for Highland-District 2. The county-level fire dispatch channels in the same county: Norton County Fire 155.4300 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Highland-District 2?

Yes. The county-level systems that cover Highland-District 2 are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Highland-District 2?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Highland-District 2?

For Highland-District 2, start with the Norton site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.