Skip to content

Agency Fire and EMS Frequencies

We do not have frequencies listed specifically for Agency in Osage County, Kansas yet. Countywide channels for Osage County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lyndon (Kansas Statewide Interoperable Communication System (KSICS)), about 6 miles away.

About Agency Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Agency: Osage County Fire 453.4250 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Osage County Fire talkgroup 1326 (hex 52e).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Agency, start with the Lyndon site of Kansas Statewide Interoperable Communication System (KSICS), about 6 miles away. Its control channels: 856.0125, 857.0625 MHz.

Data updated .

Osage County channels that also cover Agency

Fire Dispatch

Fire Dispatch frequencies for Osage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Osage County FireFire and EMS Dispatch453.4250
In 458.4250
FMNWPNT670

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Osage County FireOsage County Fire – Dispatch132652eD
Osage County EMSOsage County EMS – Dispatch165867aD

Nearest trunked radio sites

Distances are measured from the center of Agency.

Lyndon · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 63 (hex 3F) · NAC 1B1 · about 6 mi away
Control 856.0125, 857.0625
Voice 854.5875, 858.0625, 859.2625, 859.4625
Williamsburg · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 52 (hex 34) · NAC 1B2 · about 9 mi away
Control 857.6375, 858.1125
Voice 857.1375
Pomona · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 49 (hex 31) · NAC 1B9 · about 10 mi away
Control 857.6125, 858.1875
Voice 851.4, 853.325, 857.1125, 859.0125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Agency?

We do not have a fire dispatch channel listed specifically for Agency. The county-level fire dispatch channels in the same county: Osage County Fire 453.4250 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Agency?

Yes. The county-level systems that cover Agency are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Agency?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Agency?

For Agency, start with the Lyndon site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.0125, 857.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.