Skip to content

Elk Fire and EMS Frequencies

We do not have frequencies listed specifically for Elk in Osage County, Kansas yet. Countywide channels for Osage County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pomona (Kansas Statewide Interoperable Communication System (KSICS)), about 9 miles away.

About Elk Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elk: Osage County Fire 453.4250 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Osage County Fire talkgroup 1326 (hex 52e).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Elk, start with the Pomona site of Kansas Statewide Interoperable Communication System (KSICS), about 9 miles away. Its control channels: 857.6125, 858.1875 MHz.

Data updated .

Osage County channels that also cover Elk

Fire Dispatch

Fire Dispatch frequencies for Osage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Osage County FireFire and EMS Dispatch453.4250
In 458.4250
FMNWPNT670

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Osage County FireOsage County Fire – Dispatch132652eD
Osage County EMSOsage County EMS – Dispatch165867aD

Nearest trunked radio sites

Distances are measured from the center of Elk.

Pomona · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 49 (hex 31) · NAC 1B9 · about 9 mi away
Control 857.6125, 858.1875
Voice 851.4, 853.325, 857.1125, 859.0125
Douglas County · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 46 (hex 2E) · NAC 1B6 · about 15 mi away
Control 851.8125, 852.0875, 852.2625, 852.45
Voice 852.6, 852.8, 853.8125, 853.9875
Lawrence · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 2 (hex 2) · NAC 1B8 · about 15 mi away
Control 851.9625, 852.175
Voice 851.7875, 852.975, 853.4, 853.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elk?

We do not have a fire dispatch channel listed specifically for Elk. The county-level fire dispatch channels in the same county: Osage County Fire 453.4250 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Elk?

Yes. The county-level systems that cover Elk are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Elk?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Elk?

For Elk, start with the Pomona site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 857.6125, 858.1875 MHz. Program a control channel first; the scanner finds the voice channels from it.