Skip to content

Hancock Fire and EMS Frequencies

We do not have frequencies listed specifically for Hancock in Osborne County, Kansas yet. Countywide channels for Osborne County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Osborne (Kansas Statewide Interoperable Communication System (KSICS)), about 9 miles away.

About Hancock Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Hancock yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@fire-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Hancock.

Osborne · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 25 (hex 19) · NAC 1B7 · about 9 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Beloit · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 23 (hex 17) · NAC 1B1 · about 28 mi away
Control 852.3125, 852.6125
Voice 851.325, 852.9375, 853.1875, 853.65
Natoma · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 64 (hex 40) · NAC 1B0 · about 29 mi away
Control 855.2375, 855.4875
Voice 854.9625, 855.7125, 855.9625, 856.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Hancock?

For Hancock, start with the Osborne site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.