Skip to content

Sherman Fire and EMS Frequencies

We do not have frequencies listed specifically for Sherman in Ottawa County, Kansas yet. Countywide channels for Ottawa County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Concordia (Kansas Statewide Interoperable Communication System (KSICS)), about 14 miles away.

About Sherman Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sherman: Ottawa County Fire 453.3000 MHz, narrow FM, 107.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Ottawa County Fire talkgroup 5210 (hex 145a).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Sherman, start with the Concordia site of Kansas Statewide Interoperable Communication System (KSICS), about 14 miles away. Its control channels: 852.2375, 852.9 MHz.

Data updated .

Ottawa County channels that also cover Sherman

Fire Dispatch

Fire Dispatch frequencies for Ottawa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ottawa County FireFire Tone Out453.3000
In 458.3000
107.2 PLFMNWNLU429
Ottawa County FireOttawa County Fire – Dispatch (Dispatch before KSICS)453.5500
In 458.5500
146.2 PLFMNWPUD315

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Ottawa County FireOttawa County Fire – Dispatch5210145aD
Ottawa County FireFire Event5211145bD
Ottawa County FireFire Event5212145cD
Ottawa County FireFire Event5213145dD

Nearest trunked radio sites

Distances are measured from the center of Sherman.

Concordia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 17 (hex 11) · NAC 1B1 · about 14 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Bennington · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 16 (hex 10) · NAC 1B2 · about 21 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
KSU Campus · Riley County
RFSS 37 · Site 37 (hex 25) · NAC 025 · about 24 mi away
Control 856.0125, 856.9375, 857.7625, 858.2625, 858.7625, 859.2625, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sherman?

We do not have a fire dispatch channel listed specifically for Sherman. The county-level fire dispatch channels in the same county: Ottawa County Fire 453.3000 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Sherman?

Yes. The county-level systems that cover Sherman are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Sherman?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Sherman?

For Sherman, start with the Concordia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.