Skip to content

Logan Fire and EMS Frequencies

We do not have frequencies listed specifically for Logan in Pawnee County, Kansas yet. Countywide channels for Pawnee County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Great Bend South (Kansas Statewide Interoperable Communication System (KSICS)), about 18 miles away.

About Logan Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Logan: Larned State Hospital 858.5375 MHz, FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Pawnee County channels that also cover Logan

Fire Dispatch

Fire Dispatch frequencies for Pawnee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Larned State HospitalLSH Security and Fire858.5375
In 813.5375
FMWPGU298

Nearest trunked radio sites

Distances are measured from the center of Logan.

Great Bend South · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 58 (hex 3A) · NAC 1B5 · about 18 mi away
Control 856.9625, 857.4625
Voice 856.4625, 857.9625, 858.7375, 858.9875
Great Bend · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 19 (hex 13) · NAC 1B5 · about 24 mi away
Control 852.1125, 852.4125, 852.75
Voice 851.8, 853.475, 853.9
Fellsburg · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 20 (hex 14) · NAC 1B4 · about 25 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Logan?

We do not have a fire dispatch channel listed specifically for Logan. The county-level fire dispatch channels in the same county: Larned State Hospital 858.5375 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Logan?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Logan?

For Logan, start with the Great Bend South site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.9625, 857.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.