Skip to content

Elk Creek Fire and EMS Frequencies

We do not have frequencies listed specifically for Elk Creek in Republic County, Kansas yet. Countywide channels for Republic County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Haddam (Kansas Statewide Interoperable Communication System (KSICS)), about 10 miles away.

About Elk Creek Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elk Creek: Republic County Fire 154.0850 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Elk Creek: Republic County EMS 155.3250 MHz, narrow FM, no tone.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Republic County channels that also cover Elk Creek

Fire Dispatch

Fire Dispatch frequencies for Republic County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Republic County FireRepublic County Fire – Dispatch154.0850
In 158.7300
123.0 PLFMNKZF853

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Republic County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Republic County FireRepublic County Fire – Tactical Channel155.7150
In 158.7600
162.2 PLFMNKZF853

EMS Dispatch

EMS Dispatch frequencies for Republic County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Republic County EMSRepublic County EMS – Dispatch155.3250FMNKZH937

Nearest trunked radio sites

Distances are measured from the center of Elk Creek.

Haddam · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 19 (hex 13) · NAC 1B4 · about 10 mi away
Control 852.4625, 852.725
Voice 851.8375, 852.975, 853.4, 853.8625
KSU Campus · Riley County
RFSS 37 · Site 37 (hex 25) · NAC 025 · about 21 mi away
Control 856.0125, 856.9375, 857.7625, 858.2625, 858.7625, 859.2625, 859.9375
Concordia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 17 (hex 11) · NAC 1B1 · about 23 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elk Creek?

We do not have a fire dispatch channel listed specifically for Elk Creek. The county-level fire dispatch channels in the same county: Republic County Fire 154.0850 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Elk Creek?

We do not have a EMS dispatch channel listed specifically for Elk Creek. The county-level EMS dispatch channels in the same county: Republic County EMS 155.3250 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Elk Creek?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Elk Creek?

For Elk Creek, start with the Haddam site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4625, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.