About Mitchell Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Mitchell: Rice, County Fire 158.7600 MHz, narrow FM, 465 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mitchell, start with the Lyons site of Kansas Statewide Interoperable Communication System (KSICS), about 3 miles away. Its control channels: 852.4875, 852.775 MHz.
- 8 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Rice County channels that also cover Mitchell
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rice, County Fire | Fire and EMS (Tone Out before KSICS) | 158.7600 In 153.7850 | 465 DPL | FMN | WNVY904 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rice, County Fire | Fire Operations | 154.3400 In 159.1800 | 703 DPL | FMN | WQAX260 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rice, County EMS | EMS Operations | 155.8350 In 153.9200 | 627 DPL | FMN | WNYH456 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rice, County EMS | EMS Training | 155.3250 | FMN | WPVJ286 |
Kansas Statewide Interoperable Communication System (KSICS)
8 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rice County Fire | Fire/EMS Dispatch-Page Out | 2852 | b24 | D Encrypted |
| Rice County Fire | Fire/EMS Operations | 2838 | b16 | D Encrypted |
| Rice County Fire | Fire/EMS Operations | 2839 | b17 | D Encrypted |
| Rice County Fire | Fire/EMS Operations | 2840 | b18 | D Encrypted |
| Rice County Fire | Fire /EMS Operations | 2841 | b19 | D Encrypted |
| Rice County EMS | Rice County EMS – Tactical Channel | 2860 | b2c | D Encrypted |
| Rice County Hospital | Hospital Emergency Room – Patient Reports | 2857 | b29 | D Encrypted |
| Rice County Hospital | Hospital Event 1 – Disaster | 2862 | b2e | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Mitchell.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Mitchell?
We do not have a fire dispatch channel listed specifically for Mitchell. The county-level fire dispatch channels in the same county: Rice, County Fire 158.7600 MHz, narrow FM, 465 DPL.
Do fire departments and EMS use a trunked radio system in Mitchell?
Yes. The county-level systems that cover Mitchell are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mitchell?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mitchell?
For Mitchell, start with the Lyons site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.