About Township 2 Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Township 2: Rooks County Fire 154.4150 MHz, narrow FM, 110.9 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Rooks County Fire talkgroup 4374 (hex 1116).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Township 2, start with the Zurich site of Kansas Statewide Interoperable Communication System (KSICS), about 13 miles away. Its control channels: 852.1125, 852.4125 MHz.
Data updated .
Rooks County channels that also cover Township 2
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rooks County Fire | Fire and EMS Dispatch | 154.4150 In 153.8900 | 110.9 PL | FMN | WNWG806 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rooks County Fire | Fire and EMS – Plainville Repeater | 154.4150 In 153.8900 | 107.2 PL | FMN | WNWG806 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rooks County Fire | Rooks County Fire – Dispatch | 4374 | 1116 | D |
| Rooks County Fire | Fire Operations | 4375 | 1117 | D |
| Rooks County EMS | Rooks County EMS – Dispatch | 4372 | 1114 | D |
| Rooks County EMS | EMS Operations | 4373 | 1115 | D |
Nearest trunked radio sites
Distances are measured from the center of Township 2.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Township 2?
We do not have a fire dispatch channel listed specifically for Township 2. The county-level fire dispatch channels in the same county: Rooks County Fire 154.4150 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Township 2?
Yes. The county-level systems that cover Township 2 are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Township 2?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Township 2?
For Township 2, start with the Zurich site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.