Skip to content

Lone Star Fire and EMS Frequencies

We do not have frequencies listed specifically for Lone Star in Rush County, Kansas yet. Countywide channels for Rush County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rush Center (Kansas Statewide Interoperable Communication System (KSICS)), about 8 miles away.

About Lone Star Fire and EMS Frequencies

Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Rush County Fire talkgroup 458 (hex 1ca).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lone Star, start with the Rush Center site of Kansas Statewide Interoperable Communication System (KSICS), about 8 miles away. Its control channels: 851.7375, 852.0625 MHz.

Data updated .

Rush County channels that also cover Lone Star

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County FireFire and EMS453.3500
In 458.3500
FMNWNMJ820
Rush County FireFire and EMS453.9250
In 458.9250
FMNWNMJ820

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Rush County FireRush County Fire – Dispatch4581caD

Nearest trunked radio sites

Distances are measured from the center of Lone Star.

Rush Center · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 22 (hex 16) · NAC 1B9 · about 8 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
Great Bend · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 19 (hex 13) · NAC 1B5 · about 24 mi away
Control 852.1125, 852.4125, 852.75
Voice 851.8, 853.475, 853.9
Susank · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 59 (hex 3B) · NAC 1B0 · about 24 mi away
Control 856.7375, 857.2625
Voice 856.2625, 857.7375, 858.2625, 858.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Lone Star?

Yes. The county-level systems that cover Lone Star are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lone Star?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lone Star?

For Lone Star, start with the Rush Center site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.