About Garfield Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Garfield: Smith County Fire 154.7550 MHz, narrow FM, 731 DPL. County-level ems dispatch that covers Garfield: Smith County EMS 159.1500 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Smith County EMS talkgroup 4488 (hex 1188).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Garfield, start with the Osborne site of Kansas Statewide Interoperable Communication System (KSICS), about 10 miles away. Its control channels: 852.4875, 852.775 MHz.
Data updated .
Smith County channels that also cover Garfield
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Smith County Fire | Smith County Fire – Dispatch | 154.7550 In 159.2250 | 731 DPL | FMN | WQEY416 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Smith County EMS | Smith County EMS – Dispatch (Dispatch before KSICS) | 159.1500 In 156.1500 | FMN | WNHK433 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Smith County EMS | County EMS Dispatch | 4488 | 1188 | D |
Nearest trunked radio sites
Distances are measured from the center of Garfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Garfield?
We do not have a fire dispatch channel listed specifically for Garfield. The county-level fire dispatch channels in the same county: Smith County Fire 154.7550 MHz, narrow FM, 731 DPL.
What frequency does EMS or the ambulance service use in Garfield?
We do not have a EMS dispatch channel listed specifically for Garfield. The county-level EMS dispatch channels in the same county: Smith County EMS 159.1500 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Garfield?
Yes. The county-level systems that cover Garfield are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Garfield?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Garfield?
For Garfield, start with the Osborne site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.