About Bluff Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bluff: Sumner County Fire 46.1400 MHz, FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Sumner County Hospital talkgroup 664 (hex 298).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups; Sumner County Public Safety: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Sumner County channels that also cover Bluff
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sumner County Fire | Sumner County Fire – Dispatch (Old Low Band Frequency) | 46.1400 | FM | WNFR702 | |
| Sumner County Fire | Fire and EMS Page Out – Riverdale Tower | 159.1425 | CSQ | FMN | WPSQ547 |
| Sumner County Fire | Fire and EMS Page Out | 163.2500 | CSQ | FMN | WPSQ547 |
| Sumner County Fire | Fire and EMS (Dispatch before TRS) | 453.5750 In 458.5750 | 162.2 PL | FMN | WNUW940 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sumner County Fire | Fire and EMS | 453.0500 In 458.0500 | FMN | WPLU366 | |
| Sumner County Fire | Fire Mutual Aid | 453.1250 In 458.1250 | FMN | WPFY707 | |
| Sumner County Fire | Fire and EMS | 453.1750 In 458.1750 | FMN | WPFY707 | |
| Sumner County Fire | Fire and EMS Tactical | 453.3500 In 458.3500 | 103.5 PL | FMN | WNNY465 |
| Sumner County Fire | Fire Mutual Aid | 453.5000 In 458.5000 | 114.8 PL | FMN | WNRW324 |
| Sumner County Fire | Fire and EMS Tactical | 453.6750 In 458.6750 | 114.8 PL | FMN | WNRT537 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sumner County Hospital | Sumner Regional Medical Center | 664 | 298 | D |
| Sumner County Hospital | Sumner County Hospital | 665 | 299 | D |
Sumner County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sumner County Fire | Fie and EMS Dispatch | 101076 | 18ad4 | D |
| Sumner County Fire | Fire and EMS 2 Tactical | 102076 | 18ebc | D |
Nearest trunked radio sites
Distances are measured from the center of Bluff.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bluff?
We do not have a fire dispatch channel listed specifically for Bluff. The county-level fire dispatch channels in the same county: Sumner County Fire 46.1400 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Bluff?
Yes. The county-level systems that cover Bluff are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups; Sumner County Public Safety: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bluff?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bluff?
For Bluff, start with the Mayfield site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.