About Fall River Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fall River: Wilson County Fire 453.0250 MHz, narrow FM, 107.2 PL. County-level ems dispatch that covers Fall River: Wilson County EMS 453.4500 MHz, narrow FM, 156.7 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Wilson County channels that also cover Fall River
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County Fire | Wilson County Fire – Dispatch | 453.0250 In 458.0250 | 107.2 PL | FMN | WQPP339 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County EMS | County 911 Dispatch | 453.4500 In 458.4500 | 156.7 PL | FMN | WNWI718 |
Nearest trunked radio sites
Distances are measured from the center of Fall River.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fall River?
We do not have a fire dispatch channel listed specifically for Fall River. The county-level fire dispatch channels in the same county: Wilson County Fire 453.0250 MHz, narrow FM, 107.2 PL.
What frequency does EMS or the ambulance service use in Fall River?
We do not have a EMS dispatch channel listed specifically for Fall River. The county-level EMS dispatch channels in the same county: Wilson County EMS 453.4500 MHz, narrow FM, 156.7 PL.
What scanner do I need to listen to fire and EMS in Fall River?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Fall River?
For Fall River, start with the Severy site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.