About Newark Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Newark: Wilson County Fire 453.0250 MHz, narrow FM, 107.2 PL. County-level ems dispatch that covers Newark: Wilson County EMS 453.4500 MHz, narrow FM, 156.7 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Wilson County channels that also cover Newark
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County Fire | Wilson County Fire – Dispatch | 453.0250 In 458.0250 | 107.2 PL | FMN | WQPP339 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilson County EMS | County 911 Dispatch | 453.4500 In 458.4500 | 156.7 PL | FMN | WNWI718 |
Nearest trunked radio sites
Distances are measured from the center of Newark.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Newark?
We do not have a fire dispatch channel listed specifically for Newark. The county-level fire dispatch channels in the same county: Wilson County Fire 453.0250 MHz, narrow FM, 107.2 PL.
What frequency does EMS or the ambulance service use in Newark?
We do not have a EMS dispatch channel listed specifically for Newark. The county-level EMS dispatch channels in the same county: Wilson County EMS 453.4500 MHz, narrow FM, 156.7 PL.
What scanner do I need to listen to fire and EMS in Newark?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Newark?
For Newark, start with the Buffalo site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4625, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.