Skip to content

Cunningham Fire and EMS Frequencies

We do not have frequencies listed specifically for Cunningham in Carlisle County, Kentucky yet. Countywide channels for Carlisle County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wickliffe (KY SERVS), about 11 miles away.

About Cunningham Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cunningham: Carlisle County Fire 155.7825 MHz, narrow FM, 754 DPL. County-level ems dispatch that covers Cunningham: Carlisle County EMS 151.0775 MHz, P25, NAC 293.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Carlisle County channels that also cover Cunningham

Fire Dispatch

Fire Dispatch frequencies for Carlisle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carlisle County FireCarlisle County Fire – Dispatch155.7825754 DPLFMNWPUR957

Fire Talk-around

Fire Talk-around frequencies for Carlisle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Milburn FD Fireground FireMilburn Fire Department Fireground151.4675
In 159.2550
FMNWQLY725

EMS Dispatch

EMS Dispatch frequencies for Carlisle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carlisle County EMSCarlisle County EMS – Dispatch151.0775NAC 293P25WPUR957
Carlisle County EMSCarlisle County EMS – Dispatch151.0775432 DPLFMNWPUR957

EMS Talk-around

EMS Talk-around frequencies for Carlisle County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Carlisle County EMSCarlisle County EMS – Alternate155.160091.5 PLFMN—
Carlisle County EMSAmbulance Service155.1600
In 151.8200
206.5 PLFMN—

Nearest trunked radio sites

Distances are measured from the center of Cunningham.

Wickliffe · KY SERVS
RFSS 3 · Site 106 (hex 6A) · NAC 9C6 · about 11 mi away
Control 771.33125, 772.00625, 772.65625, 773.40625
Voice 769.35625, 770.76875
Paducah · KY SERVS
RFSS 3 · Site 105 (hex 69) · NAC 9C5 · about 15 mi away
Control 769.85625, 770.10625, 770.60625, 771.18125
Voice 769.30625, 769.60625
Paducah · Paducah/McCracken County P-25
RFSS 1 · Site 1 (hex 1) · NAC BB2 · about 15 mi away
Control 854.7125, 855.9875, 856.7375, 857.2625, 857.7375, 858.2375, 858.2625, 858.7375, 859.2375, 859.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cunningham?

We do not have a fire dispatch channel listed specifically for Cunningham. The county-level fire dispatch channels in the same county: Carlisle County Fire 155.7825 MHz, narrow FM, 754 DPL.

What frequency does EMS or the ambulance service use in Cunningham?

We do not have a EMS dispatch channel listed specifically for Cunningham. The county-level EMS dispatch channels in the same county: Carlisle County EMS 151.0775 MHz, P25, NAC 293.

What scanner do I need to listen to fire and EMS in Cunningham?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Cunningham?

For Cunningham, start with the Wickliffe site of KY SERVS. Its control channels are 771.33125, 772.00625, 772.65625, 773.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.