About Sedalia Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Sedalia: Graves County Fire 154.8825 MHz, narrow FM, 503 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 8 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Graves County channels that also cover Sedalia
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Graves County Fire | Graves County Fire – Dispatch | 154.8825 In 159.4500 | 503 DPL | FMN | WQST898 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Emergency Management Expired: Expired 3/04 | EMA – County Fire Coordination | 159.2550 In 151.2650 | 162.2 PL | FMN | KKC753 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire - Rescue Repeater | Fire – Rescue Repeater – Repeater | 155.3700 In 156.0300 | NAC 2D4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Farmington Repeater | 151.0025 In 156.0675 | 173.8 PL | FMN | WQBQ773 |
| Graves County Fire | Graves County Fire – Wingo Repeater | 151.0175 In 159.0900 | NAC 3A4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Mayfield Repeater | 151.1675 In 155.9700 | NAC 2E4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Fancy Farm Repeater | 151.2050 In 155.3175 | NAC 384 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Melber Repeater | 151.3100 In 154.9875 | NAC 3C4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Lynnville Repeater | 151.3550 In 159.3900 | NAC 2F4 | P25 | WQPR285 |
| Graves County Fire | Graves County Fire – Symsonia Repeater | 151.3700 In 156.0300 | NAC 2D4 | P25 | WQPR285 |
| Graves County Fire | Fire-Central Repeater | 155.8875 In 153.9950 | NAC 340 | P25 | WQYA393 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson Purchase Medical Center | EMS to Hospital | 155.3400 | 114.8 PL | FMN | KNDZ225 |
Nearest trunked radio sites
Distances are measured from the center of Sedalia.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sedalia?
We do not have a fire dispatch channel listed specifically for Sedalia. The county-level fire dispatch channels in the same county: Graves County Fire 154.8825 MHz, narrow FM, 503 DPL.
What scanner do I need to listen to fire and EMS in Sedalia?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Sedalia?
For Sedalia, start with the Farmington site of KY SERVS. Its control channels are 770.55625, 770.81875, 771.13125, 771.38125 MHz. Program a control channel first; the scanner finds the voice channels from it.