Skip to content

Big Clifty Fire and EMS Frequencies

We do not have frequencies listed specifically for Big Clifty in Grayson County, Kentucky yet. Countywide channels for Grayson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Elizabethtown (KY SERVS), about 10 miles away.

About Big Clifty Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Big Clifty: Grayson County Fire 460.5250 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Big Clifty: Grayson County EMS 155.0100 MHz, narrow FM, 91.5 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Grayson County channels that also cover Big Clifty

Fire Dispatch

Fire Dispatch frequencies for Grayson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grayson County FireGrayson County Fire – Dispatch460.5250
In 465.5250
103.5 PLFMNWPGM290

Fire Talk-around

Fire Talk-around frequencies for Grayson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Falls FireFalls Fire154.2200
In 153.7700
146.2 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Grayson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grayson County EMSGrayson County EMS – Dispatch155.0100
In 158.9100
91.5 PLFMNWPGM290

EMS Talk-around

EMS Talk-around frequencies for Grayson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grayson County EMSEMS Private152.3000FMN—
Grayson County EMSEMA154.1150
In 158.9850
69.3 PLFMN—

Nearest trunked radio sites

Distances are measured from the center of Big Clifty.

Elizabethtown · KY SERVS
RFSS 3 · Site 128 (hex 80) · NAC 9C9 · about 10 mi away
Control 773.40625
Voice 769.35625, 771.10625, 771.83125, 773.13125
Silvermine · KY SERVS
RFSS 3 · Site 125 (hex 7D) · NAC 9C6 · about 19 mi away
Control 774.41875
Voice 772.14375, 772.63125, 773.91875
Bonnieville · KY SERVS
RFSS 3 · Site 130 (hex 82) · NAC 9C5 · about 22 mi away
Control 774.90625
Voice 770.84375, 771.44375, 771.80625, 774.18125, 774.44375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Big Clifty?

We do not have a fire dispatch channel listed specifically for Big Clifty. The county-level fire dispatch channels in the same county: Grayson County Fire 460.5250 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Big Clifty?

We do not have a EMS dispatch channel listed specifically for Big Clifty. The county-level EMS dispatch channels in the same county: Grayson County EMS 155.0100 MHz, narrow FM, 91.5 PL.

What scanner do I need to listen to fire and EMS in Big Clifty?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Big Clifty?

For Big Clifty, start with the Elizabethtown site of KY SERVS. Its control channels are 773.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.