Skip to content

Kenvir Fire and EMS Frequencies

We do not have frequencies listed specifically for Kenvir in Harlan County, Kentucky yet. Countywide channels for Harlan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Inman (Harlan County Public Safety), about 2 miles away.

About Kenvir Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Kenvir: County Fire Dispatch 453.1500 MHz, NXDN48, RAN 2. County-level ems dispatch that covers Kenvir: EMS Agencies 451.2750 MHz, DMR, CC 9 · TG 10010 · SL 1. Trunked: Harlan County Public Safety, for example Harlan County Public Safety talkgroup 10 (hex a).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 10 conventional channels use a digital mode (NXDN48, DMR), which needs a scanner that decodes those modes.
  • Trunked radio systems that carry fire and EMS traffic here: Harlan County Public Safety: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Kenvir, start with the Inman site of Harlan County Public Safety, about 2 miles away. Its control channels: 453.3125, 453.8125 MHz.

Data updated .

Harlan County channels that also cover Kenvir

Fire Dispatch

Fire Dispatch frequencies for Harlan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire DispatchCounty Fire Dispatch (Baxter)453.1500
In 458.1500
RAN 2NXDN48WPAW882
County Fire DispatchCounty Fire Dispatch (Alva)453.6188RAN 2NXDN48WQVL200
County Fire DispatchCounty Fire Dispatch (Wallins)453.7500RAN 2NXDN48WQGH536
County Fire DispatchCounty Fire Dispatch (Inman)453.7688RAN 2NXDN48WQVL200
County Fire DispatchCounty Fire Dispatch (Little Black Mountain)453.7813RAN 2NXDN48WQVL200
County Fire DispatchCounty Fire Dispatch460.3750
In 465.3750
RAN 2NXDN48WPAW882

Fire Talk-around

Fire Talk-around frequencies for Harlan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harlan County FireHarlan County Fire – Alternate153.7550FMKA48246
Harlan County FireHarlan County Fire – Alternate153.7550FMWFR422
Harlan County FireHarlan County Fire – Alternate155.7450FMKA48246

EMS Dispatch

EMS Dispatch frequencies for Harlan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS AgenciesAmerican Medical Response (Baxter)451.2750
In 456.2750
CC 9 · TG 10010 · SL 1DMRWRDS363
EMS AgenciesAmerican Medical Response (Cumberland)451.7000CC 9 · TG 10010 · SL 1DMRWRDS363
EMS AgenciesAmerican Medical Response452.0125CC 9 · TG 10010 · SL 1DMR—
EMS AgenciesAmerican Medical Response (Wallins)452.8500
In 457.8500
CC 9 · TG 10010 · SL 1DMRWRDS363

Hospitals & Medical

Hospitals & Medical frequencies for Harlan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS AgenciesHarlan ARH Hospital452.8000
In 457.8000
FMNWQBA379

Harlan County Public Safety

Harlan County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Harlan County Public SafetyHarlan County Public Safety – Dispatch10aD

Nearest trunked radio sites

Distances are measured from the center of Kenvir.

Inman · Harlan County Public Safety
Site 7 (hex 7) · about 2 mi away
Control 453.3125, 453.8125
Voice 453.56875, 453.66875
Grays Knob · Harlan County Public Safety
Site 3 (hex 3) · about 9 mi away
Control 451.05625, 451.9
Voice 453.16875, 453.81875
Harlan · Harlan County Public Safety
Site 2 (hex 2) · about 9 mi away
Control 461.6125, 463.2375
Voice 460.04375, 460.59375

Common questions

What frequency does the fire department use in Kenvir?

We do not have a fire dispatch channel listed specifically for Kenvir. The county-level fire dispatch channels in the same county: County Fire Dispatch 453.1500 MHz, NXDN48, RAN 2.

What frequency does EMS or the ambulance service use in Kenvir?

We do not have a EMS dispatch channel listed specifically for Kenvir. The county-level EMS dispatch channels in the same county: EMS Agencies 451.2750 MHz, DMR, CC 9 · TG 10010 · SL 1.

Do fire departments and EMS use a trunked radio system in Kenvir?

Yes. The county-level systems that cover Kenvir are Fire and EMS talkgroups are listed for Harlan County Public Safety: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Kenvir?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48, DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Kenvir?

For Kenvir, start with the Inman site of Harlan County Public Safety. Its control channels are 453.3125, 453.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.