About Annville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Annville: Jackson County Fire 155.0850 MHz, P25, NAC 065. County-level ems dispatch that covers Annville: Jackson County EMS 155.1225 MHz, P25, NAC 080.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Jackson County channels that also cover Annville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County Fire | Jackson County Fire – Dispatch | 155.0850 In 158.7450 | NAC 065 | P25 | WPKV279 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County EMS | Jackson County EMS – Dispatch | 155.1225 | NAC 080 | P25 | — |
| Jackson County EMS | Jackson County EMS – Dispatch | 462.9500 In 467.9500 | 179.9 PL | FM | WPQA324 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County EMS | Jackson County EMS – Alternate | 462.9750 In 467.9750 | 179.9 PL | FM | WPQA324 |
| Jackson County EMS | Ambulance Service | 463.1750 In 468.1750 | 156.7 PL | FM | WPQA324 |
Nearest trunked radio sites
Distances are measured from the center of Annville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Annville?
We do not have a fire dispatch channel listed specifically for Annville. The county-level fire dispatch channels in the same county: Jackson County Fire 155.0850 MHz, P25, NAC 065.
What frequency does EMS or the ambulance service use in Annville?
We do not have a EMS dispatch channel listed specifically for Annville. The county-level EMS dispatch channels in the same county: Jackson County EMS 155.1225 MHz, P25, NAC 080.
What scanner do I need to listen to fire and EMS in Annville?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Annville?
For Annville, start with the Big Hill North Backup Site site of Bluegrass Regional Radio Network (BRRN). Its control channels are 851.425 MHz. Program a control channel first; the scanner finds the voice channels from it.