About Magnolia Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Magnolia: Larue County Fire 159.0600 MHz, narrow FM, 115 DPL. County-level ems dispatch that covers Magnolia: LARUE COUNTY EMS 158.8575 MHz, P25, NAC 26D.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Larue County channels that also cover Magnolia
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Larue County Fire | Larue County FIRE PAGE | 159.0600 | 115 DPL | FMN | WQOS620 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Larue County Fire | Larue County Fire | 158.7975 In 154.3850 | NAC 26E | P25 | WQTP423 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| LARUE COUNTY EMS | Larue County EMS | 158.8575 | NAC 26D | P25 | WQOS620 |
Nearest trunked radio sites
Distances are measured from the center of Magnolia.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Magnolia?
We do not have a fire dispatch channel listed specifically for Magnolia. The county-level fire dispatch channels in the same county: Larue County Fire 159.0600 MHz, narrow FM, 115 DPL.
What frequency does EMS or the ambulance service use in Magnolia?
We do not have a EMS dispatch channel listed specifically for Magnolia. The county-level EMS dispatch channels in the same county: LARUE COUNTY EMS 158.8575 MHz, P25, NAC 26D.
What scanner do I need to listen to fire and EMS in Magnolia?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Magnolia?
For Magnolia, start with the Bonnieville site of KY SERVS. Its control channels are 774.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.