Skip to content

Doe Valley Fire and EMS Frequencies

We do not have frequencies listed specifically for Doe Valley in Meade County, Kentucky yet. Countywide channels for Meade County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ekron (KY SERVS), about 7 miles away.

About Doe Valley Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Doe Valley: Meade County Fire 155.3850 MHz, narrow FM, 229.1 PL. County-level ems dispatch that covers Doe Valley: Meade County EMS 151.1150 MHz, narrow FM, 229.1 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Meade County channels that also cover Doe Valley

Fire Dispatch

Fire Dispatch frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County FireFire- Tone Out155.3850229.1 PLFMNWQAK556
Meade County FireMeade County Fire – Dispatch157.4850
In 156.0600
229.1 PLFMNWQAK556

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County FireMeade County Fire – Tactical Channel154.0550FMNWNPG818
Meade County FireMeade County Fire – Tactical Channel154.3550FMNWPIT488
Meade County FireMeade County Fire – Tactical Channel155.0850FMNWPQG797

Fire Talk-around

Fire Talk-around frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County FireFire-Talkaround & Med Chopper LZ154.1750FMNWYZ321

EMS Dispatch

EMS Dispatch frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County EMSMeade County EMS – Dispatch151.1150
In 159.0100
229.1 PLFMNWQAK556

Nearest trunked radio sites

Distances are measured from the center of Doe Valley.

Ekron · KY SERVS
RFSS 3 · Site 31 (hex 1F) · NAC 9C1 · about 7 mi away
Control 772.89375
Voice 771.79375, 772.21875, 772.46875
Elizabethtown · KY SERVS
RFSS 3 · Site 128 (hex 80) · NAC 9C9 · about 24 mi away
Control 773.40625
Voice 769.35625, 771.10625, 771.83125, 773.13125
New Bernheim · KY SERVS
RFSS 3 · Site 32 (hex 20) · NAC 9C2 · about 24 mi away
Control 774.68125
Voice 771.64375, 771.94375, 773.63125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Doe Valley?

We do not have a fire dispatch channel listed specifically for Doe Valley. The county-level fire dispatch channels in the same county: Meade County Fire 155.3850 MHz, narrow FM, 229.1 PL.

What frequency does EMS or the ambulance service use in Doe Valley?

We do not have a EMS dispatch channel listed specifically for Doe Valley. The county-level EMS dispatch channels in the same county: Meade County EMS 151.1150 MHz, narrow FM, 229.1 PL.

What scanner do I need to listen to fire and EMS in Doe Valley?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Doe Valley?

For Doe Valley, start with the Ekron site of KY SERVS. Its control channels are 772.89375 MHz. Program a control channel first; the scanner finds the voice channels from it.