Skip to content

Mount Sterling Fire and EMS Frequencies

We do not have frequencies listed specifically for Mount Sterling in Montgomery County, Kentucky yet. Countywide channels for Montgomery County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Courthouse (Bath County Emergency Communications Network), about 12 miles away.

About Mount Sterling Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mount Sterling: Montgomery County Fire 460.5750 MHz, NXDN96, RAN 1. County-level ems dispatch that covers Mount Sterling: Montgomery County EMS 453.5750 MHz, FM, 146.2 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.

Data updated .

Montgomery County channels that also cover Mount Sterling

Fire Dispatch

Fire Dispatch frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County FireMontgomery County Fire – Dispatch (Post Dispatch Traffic)460.5750
In 465.5750
RAN 1NXDN96WNKJ549
Montgomery County FireMontgomery County Fire – Dispatch (Dispatched here then switches to NXDN)460.5750
In 465.5750
146.2 PLFMWNKJ549

EMS Dispatch

EMS Dispatch frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County EMSMontgomery County EMS – Dispatch453.5750
In 458.5750
146.2 PLFMWNMA403

EMS Talk-around

EMS Talk-around frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County EMSNorth460.5750141.3 PLFMWNKJ549

Hospitals & Medical

Hospitals & Medical frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County HospitalEMS to St. Joseph Mt. Sterling Hospital155.3400146.2 PLFMKUZ969

Nearest trunked radio sites

Distances are measured from the center of Mount Sterling.

Courthouse · Bath County Emergency Communications Network
RFSS 7 · Site 7 (hex 7) · NAC 064 · about 12 mi away
Control 453.475
Voice 453.1875, 453.75, 460.1375, 460.55
Sharpsburg · Bath County Emergency Communications Network
RFSS 6 · Site 6 (hex 6) · NAC 064 · about 12 mi away
Control 453.925
Voice 453.2625, 453.675, 460.075, 460.625
Preston · Bath County Emergency Communications Network
RFSS 3 · Site 3 (hex 3) · NAC 064 · about 12 mi away
Control 453.2, 460.125
Voice 453.05, 453.425, 453.7, 460.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mount Sterling?

We do not have a fire dispatch channel listed specifically for Mount Sterling. The county-level fire dispatch channels in the same county: Montgomery County Fire 460.5750 MHz, NXDN96, RAN 1.

What frequency does EMS or the ambulance service use in Mount Sterling?

We do not have a EMS dispatch channel listed specifically for Mount Sterling. The county-level EMS dispatch channels in the same county: Montgomery County EMS 453.5750 MHz, FM, 146.2 PL.

What scanner do I need to listen to fire and EMS in Mount Sterling?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.

What are the control channels for trunked radio in Mount Sterling?

For Mount Sterling, start with the Courthouse site of Bath County Emergency Communications Network. Its control channels are 453.475 MHz. Program a control channel first; the scanner finds the voice channels from it.