Skip to content

Onton Fire and EMS Frequencies

We do not have frequencies listed specifically for Onton in Webster County, Kentucky yet. Countywide channels for Webster County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sacramento (KY SERVS), about 9 miles away.

About Onton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Onton: Webster County Fire 154.1750 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Onton: Webster County EMS 155.1750 MHz, narrow FM, 179.9 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Webster County channels that also cover Onton

Fire Dispatch

Fire Dispatch frequencies for Webster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Webster County FireWebster County Fire – Dispatch154.1750
In 151.0550
156.7 PLFMNWPMM446

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Webster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Webster County FireEmergency Management155.9850
In 158.9700
047 DPLFMNWQNI220
Webster County FireEmergency Management155.9850
In 158.9700
136.5 PLFMNWQNI220

EMS Dispatch

EMS Dispatch frequencies for Webster County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Webster County EMSWebster County EMS – Dispatch155.1750
In 159.3600
179.9 PLFMNWPCK913

Nearest trunked radio sites

Distances are measured from the center of Onton.

Sacramento · KY SERVS
RFSS 3 · Site 111 (hex 6F) · NAC 9CB · about 9 mi away
Control 772.53125, 773.38125, 774.15625, 774.40625
Voice 770.28125, 771.45625
Dixon · KY SERVS
RFSS 3 · Site 119 (hex 77) · NAC 9C9 · about 13 mi away
Control 771.10625, 771.78125, 772.73125, 774.70625
Voice 769.33125, 770.58125
Madisonville · Hopkins County P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 643 · about 16 mi away
Control 460.025, 460.075, 460.1375, 460.175, 460.275, 460.35, 460.45, 460.525, 460.5875, 460.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Onton?

We do not have a fire dispatch channel listed specifically for Onton. The county-level fire dispatch channels in the same county: Webster County Fire 154.1750 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Onton?

We do not have a EMS dispatch channel listed specifically for Onton. The county-level EMS dispatch channels in the same county: Webster County EMS 155.1750 MHz, narrow FM, 179.9 PL.

What scanner do I need to listen to fire and EMS in Onton?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Onton?

For Onton, start with the Sacramento site of KY SERVS. Its control channels are 772.53125, 773.38125, 774.15625, 774.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.