About Cade Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Cade: Saint Martin Parish Fire 153.9500 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Cade: Acadian Ambulance Service 155.2800 MHz, narrow FM, no tone. Trunked: Louisiana Wireless Information Network (LWIN), for example St. Martin Parish - Public Safety talkgroup 24518 (hex 5fc6).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Louisiana Wireless Information Network (LWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cade, start with the New Iberia site of Louisiana Wireless Information Network (LWIN), about 8 miles away. Its control channels: 769.26875, 769.54375 MHz.
Data updated .
St. Martin Parish channels that also cover Cade
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Saint Martin Parish Fire | Volunteer Fire Department (covers all cities) | 153.9500 | 156.7 PL | FMN | KNCR641 |
| Saint Martin Parish Fire | Saint Martin Parish Fire – Alternate | 154.0700 | FMN | KNCR641 | |
| Saint Martin Parish Fire | Parishwide Fire Dispatch | 154.4450 | FM | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Saint Martin Parish Fire | Fire Mutual Aid | 154.2800 | FMN | KNCR641 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Acadian Ambulance Service | Saint Martinville Dispatch | 155.2800 | FMN | WNCX864 | |
| Acadian Ambulance Service | Saint Martinsville Dispatch | 155.2950 | FMN | WNCX864 |
Louisiana Wireless Information Network (LWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| St. Martin Parish - Public Safety | Parishwide Fire Dispatch | 24518 | 5fc6 | D |
Nearest trunked radio sites
Distances are measured from the center of Cade.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Cade?
We do not have a fire dispatch channel listed specifically for Cade. The county-level fire dispatch channels in the same county: Saint Martin Parish Fire 153.9500 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Cade?
We do not have a EMS dispatch channel listed specifically for Cade. The county-level EMS dispatch channels in the same county: Acadian Ambulance Service 155.2800 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Cade?
Yes. The county-level systems that cover Cade are Fire and EMS talkgroups are listed for Louisiana Wireless Information Network (LWIN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Cade?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Cade?
For Cade, start with the New Iberia site of Louisiana Wireless Information Network (LWIN). Its control channels are 769.26875, 769.54375 MHz. Program a control channel first; the scanner finds the voice channels from it.