About Lenox Dale Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lenox Dale: Berkshire County Fire 152.9825 MHz, narrow FM, 131.8 PL. County-level ems dispatch that covers Lenox Dale: Berkshire County EMS 151.4000 MHz, narrow FM, 546 DPL.
- 16 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Berkshire County channels that also cover Lenox Dale
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Berkshire County Fire | Fire Response | 152.9825 | 131.8 PL | FMN | WQFD787 |
| Berkshire County Fire | Berkshire County Fire – Dispatch | 154.3100 | 107.2 PL | FMN | WPBG767 |
| Berkshire County Fire | Fire Department VHF Repeater (Repeats County 154.310) | 159.6375 In 154.3100 | 107.2 PL | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Berkshire County Fire | Berkshire County Fire – Fire Ground (Countywide Overflow/Training) | 153.8825 | 343 DPL | FMN | WSET422 |
| Berkshire County Fire | Berkshire County Fire – Fire Ground (North) | 154.1600 | 107.2 PL | FMN | WPBG767 |
| Berkshire County Fire | Fireground Interior | 155.8050 | 107.2 PL | FMN | WSET422 |
| Berkshire County Fire | Berkshire County Fire – Fire Ground (South) | 158.8050 | 107.2 PL | FMN | WSET422 |
| Berkshire County Fire | Fireground Command | 159.7575 | 413 DPL | FMN | WQFD787 |
| New Marlboro Fire | New Marlboro Fire – Tactical Channel | 155.9400 | 107.2 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Berkshire County EMS | County Ambulance Service | 151.4000 | 546 DPL | FMN | KNGF805 |
| Berkshire County EMS | Action Ambulance – Pittsfield Dispatch | 152.3900 In 157.6500 | 77.0 PL | FM | WQNM511 |
| Berkshire County EMS | County Ambulance Service | 155.2800 | 88.5 PL | FMN | KNFG805 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Berkshire County EMS | Southern Berkshire Ambulance – Secondary | 155.2800 In 155.2200 | 031 DPL | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Berkshire County Hospital | CMED – Primary | 155.3400 | 107.2 PL | FMN | WQYV748 |
| Berkshire County Hospital | CMED – South (Warner Mtn) | 155.3850 In 151.4675 | 107.2 PL | FMN | WQYV748 |
| Berkshire County Hospital | CMED – Central (Lenox Mtn) | 155.3850 In 151.0325 | 107.2 PL | FMN | WQYV749 |
Nearest trunked radio sites
Distances are measured from the center of Lenox Dale.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lenox Dale?
We do not have a fire dispatch channel listed specifically for Lenox Dale. The county-level fire dispatch channels in the same county: Berkshire County Fire 152.9825 MHz, narrow FM, 131.8 PL.
What frequency does EMS or the ambulance service use in Lenox Dale?
We do not have a EMS dispatch channel listed specifically for Lenox Dale. The county-level EMS dispatch channels in the same county: Berkshire County EMS 151.4000 MHz, narrow FM, 546 DPL.
What scanner do I need to listen to fire and EMS in Lenox Dale?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Lenox Dale?
For Lenox Dale, start with the Stockbridge site of Commonwealth Of Massachusetts Interoperable Radio System (CoMIRS). Its control channels are 858.2375, 859.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.