About Lost Lake Woods Fire and EMS Frequencies
Quick answer: Trunked: Michigan's Public Safety Communications System (MPSCS), for example Alcona County Fire talkgroup 4112 (hex 1010).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 17 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lost Lake Woods, start with the Black River site of Michigan's Public Safety Communications System (MPSCS), about 4 miles away. Its control channels: 853.4375, 853.9375 MHz.
Data updated .
Alcona County channels that also cover Lost Lake Woods
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alcona County EMS | Emergency Management / EMS | 154.0550 | FMN | KZI284 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Alcona County Fire | County Fire Dispatch | 4112 | 1010 | D |
| Alcona County Fire | Curtis Twp Fire Page | 4449 | 1161 | D |
| Alcona County Fire | Curtis Twp Fire Operations | 4181 | 1055 | D |
| Alcona County Fire | Greenbush Twp Fire Operations | 4182 | 1056 | D |
| Alcona County Fire | Harrisville Twp Fire Operations | 4183 | 1057 | D |
| Alcona County Fire | Mikado Twp Fire Operations | 4184 | 1058 | D |
| Alcona County Fire | Hubbard Lake Twp Fire Operations | 4185 | 1059 | D |
| Alcona County Fire | South Shore Hubbard Lake Fire Operations | 4186 | 105a | D |
| Alcona County Fire | Alcona Twp Fire Operations | 4187 | 105b | D |
| Alcona County Fire | County First Responders | 4190 | 105e | D |
| Alcona County Fire | Fire Command Operations | 4191 | 105f | D |
| Alcona County EMS | Alcona County EMS – Dispatch | 4248 | 1098 | D |
| Alcona County EMS | Ambulance Page | 4441 | 1159 | D |
| Alcona County EMS | EMS First Responders Page | 4453 | 1165 | D |
| Alcona County EMS | Alcona County EMS – Tactical Channel | 4175 | 104f | D |
| Alcona County EMS | Alcona County EMS – Tactical Channel | 4176 | 1050 | D |
| Alcona County EMS | Medical Control Authority | 2615 | a37 | D |
Nearest trunked radio sites
Distances are measured from the center of Lost Lake Woods.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Lost Lake Woods?
Yes. The county-level systems that cover Lost Lake Woods are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 17 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lost Lake Woods?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lost Lake Woods?
For Lost Lake Woods, start with the Black River site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.4375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.