About Mathias Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Mathias: Alger County Fire 154.1000 MHz, narrow FM, 100.0 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Alger County Fire talkgroup 5055 (hex 13bf).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mathias, start with the Rapid River site of Michigan's Public Safety Communications System (MPSCS), about 6 miles away. Its control channels: 852.4125, 853.4 MHz.
Data updated .
Alger County channels that also cover Mathias
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alger County Fire | Countywide Fire Repeater | 154.1000 In 156.0150 | 100.0 PL | FMN | KNDZ232 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alger County Fire | Tri-County Fire Talkaround | 151.9550 | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Munising Memorial Hospital | Ambulance-to-Hospital Comms | 155.3400 | FMN | KNGP470 | |
| Munising Memorial Hospital | Munising Memorial Hospital – Paging | 157.4500 | FMN | KNGP470 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Alger County Fire | Fire-EMS Dispatch | 5055 | 13bf | D |
| Alger County Fire | Indian Lake First Responders Page | 23436 | 5b8c | D |
| Alger County Hospital | County EMS to Hospital | 5056 | 13c0 | D |
| Alger County Hospital | County EMS to Hospital | 5058 | 13c2 | D |
| Alger County Hospital | County EMS to Hospital | 5059 | 13c3 | D |
Nearest trunked radio sites
Distances are measured from the center of Mathias.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Mathias?
We do not have a fire dispatch channel listed specifically for Mathias. The county-level fire dispatch channels in the same county: Alger County Fire 154.1000 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Mathias?
Yes. The county-level systems that cover Mathias are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mathias?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mathias?
For Mathias, start with the Rapid River site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.4125, 853.4 MHz. Program a control channel first; the scanner finds the voice channels from it.