About Arthur Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Arthur: Clare County Fire 154.2650 MHz, narrow FM, 115 DPL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Clare County Fire talkgroup 13257 (hex 33c9).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Arthur, start with the Harrison site of Michigan's Public Safety Communications System (MPSCS), about 7 miles away. Its control channels: 853.4375, 853.9375 MHz.
Data updated .
Clare County channels that also cover Arthur
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clare County Fire | Clare County Fire – Dispatch | 154.2650 In 151.4600 | 115 DPL | FMN | WPET484 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| MyMichigan Medical Center Clare | H.E.A.R.N. (EMS-to-Hospital) | 155.3400 | FMN | WPUV517 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clare County Fire | Clare County Fire All-Call Page | 13257 | 33c9 | D |
| Clare County Fire | Clare City Fire Paging | 13258 | 33ca | D |
| Clare County Fire | Garfield Twp. Fire Paging | 13259 | 33cb | D |
| Clare County Fire | Lincoln Twp. Fire Page | 13261 | 33cd | D |
| Clare County Fire | County Fire Dispatch | 13693 | 357d | D |
| Clare County Fire | Fire-EMS | 3301 | ce5 | D |
| Clare County Fire | Clare City Fire | 13035 | 32eb | D |
| Clare County Fire | Garfield Township Fire | 13038 | 32ee | D |
| Clare County EMS | Clare County EMS – Dispatch | 3571 | df3 | D |
| Clare County Hospital | MyMichigan E.R. | 3543 | dd7 | D |
| Clare County Hospital | Medical Control Authority | 3558 | de6 | D |
Nearest trunked radio sites
Distances are measured from the center of Arthur.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Arthur?
We do not have a fire dispatch channel listed specifically for Arthur. The county-level fire dispatch channels in the same county: Clare County Fire 154.2650 MHz, narrow FM, 115 DPL.
Do fire departments and EMS use a trunked radio system in Arthur?
Yes. The county-level systems that cover Arthur are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Arthur?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Arthur?
For Arthur, start with the Harrison site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.4375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.