Skip to content

Ensign Fire and EMS Frequencies

We do not have frequencies listed specifically for Ensign in Delta County, Michigan yet. Countywide channels for Delta County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Nahma Junction (Michigan's Public Safety Communications System (MPSCS)), about 6 miles away.

About Ensign Fire and EMS Frequencies

Quick answer: Trunked: Michigan's Public Safety Communications System (MPSCS), for example Delta County Fire talkgroup 5146 (hex 141a).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ensign, start with the Nahma Junction site of Michigan's Public Safety Communications System (MPSCS), about 6 miles away. Its control channels: 853.3625, 853.8625 MHz.

Data updated .

Delta County channels that also cover Ensign

EMS Tactical

EMS Tactical frequencies for Delta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
St. Francis Health SystemMass Casualty Tactical155.3250CSQFMNKNEZ599

Hospitals & Medical

Hospitals & Medical frequencies for Delta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
St. Francis Health SystemAmbulance-to-Hospital Comms155.340082.5 PLFMNKNEZ599

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Delta County FireCounty Fire Dispatch5146141aD
Delta County EMSCounty EMS Dispatch510413f0D
Delta County EMSDelta County EMS – Dispatch510513f1D
Delta County EMSMobile Medical Response662119ddD
Delta County EMSCounty Search and Rescue5147141bD
Delta County HospitalSt. Francis Hospital6159180fD

Nearest trunked radio sites

Distances are measured from the center of Ensign.

Nahma Junction · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 14 (hex E) · NAC 796 · about 6 mi away
Control 853.3625, 853.8625
Voice 851.0625, 851.8625, 852.8625, 854.7875
Escanaba · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 17 (hex 11) · NAC 797 · about 17 mi away
Control 853.55, 853.9
Voice 851.1625, 851.4, 851.7, 851.9, 852.4
Rapid River · Michigan's Public Safety Communications System (MPSCS)
RFSS 5 · Site 13 (hex D) · NAC 796 · about 19 mi away
Control 852.4125, 853.4
Voice 851.4375, 851.925, 854.0125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Ensign?

Yes. The county-level systems that cover Ensign are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ensign?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ensign?

For Ensign, start with the Nahma Junction site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.3625, 853.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.