About Eagle Harbor Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Eagle Harbor: Keweenaw County Fire 154.3100 MHz, narrow FM, 206.5 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Keweenaw County Fire talkgroup 7100 (hex 1bbc).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Eagle Harbor, start with the Eagle Harbor site of Michigan's Public Safety Communications System (MPSCS), about 4 miles away. Its control channels: 852.9625, 853.95 MHz.
Data updated .
Keweenaw County channels that also cover Eagle Harbor
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Keweenaw County Fire | County Fire Dispatch | 154.3100 In 158.8650 | 206.5 PL | FMN | WQIT312 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Keweenaw Memorial Medical Center | Ambulance-to-Hospital Comms | 155.3400 | FMN | KXC860 | |
| Keweenaw Memorial Medical Center | Ambulance-to-Hospital Comms | 155.4000 | FMN | KXC860 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Keweenaw County Fire | Fire-EMS Dispatch | 7100 | 1bbc | D |
| Keweenaw County Fire | Lac La Belle Fire Department | 6313 | 18a9 | D |
| Keweenaw County Fire | Countywide Fire | 7101 | 1bbd | D |
| Keweenaw County Fire | Search and Rescue | 7222 | 1c36 | D |
| Keweenaw County Fire | Search and Rescue | 7223 | 1c37 | D |
| Keweenaw County EMS | Allouez First Responders Page | 7197 | 1c1d | D |
| Keweenaw County EMS | Copper Harbor First Responders Page | 7200 | 1c20 | D |
| Keweenaw County EMS | County EMS Page | 7201 | 1c21 | D |
Nearest trunked radio sites
Distances are measured from the center of Eagle Harbor.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Eagle Harbor?
We do not have a fire dispatch channel listed specifically for Eagle Harbor. The county-level fire dispatch channels in the same county: Keweenaw County Fire 154.3100 MHz, narrow FM, 206.5 PL.
Do fire departments and EMS use a trunked radio system in Eagle Harbor?
Yes. The county-level systems that cover Eagle Harbor are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Eagle Harbor?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Eagle Harbor?
For Eagle Harbor, start with the Eagle Harbor site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.9625, 853.95 MHz. Program a control channel first; the scanner finds the voice channels from it.