About Pinora Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pinora: Lake County Fire 154.4300 MHz, narrow FM, 118.8 PL. County-level ems dispatch that covers Pinora: Life EMS 155.2200 MHz, narrow FM, 103.5 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Lake County Fire talkgroup 3345 (hex d11).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pinora, start with the Chase site of Michigan's Public Safety Communications System (MPSCS), about 4 miles away. Its control channels: 852.1625, 852.7875, 853.0625 MHz.
Data updated .
Lake County channels that also cover Pinora
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lake County Fire | Lake County Fire – Dispatch | 154.4300 In 154.0100 | 118.8 PL | FMN | WRWZ596 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lake County Fire | Lake County Fire – Fire Ground | 154.2650 | 118.8 PL | FMN | WRWZ596 |
| Lake County Fire | Lake Fire and Law Enforcement | 158.8725 | 118.8 PL | FMN | WRWZ596 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Life EMS | Life EMS – Dispatch | 155.2200 In 158.9400 | 103.5 PL | FMN | KVW771 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lake County Fire | Lake County Fire – Dispatch | 3345 | d11 | D |
| Lake County EMS | Lake County EMS – Dispatch | 3575 | df7 | D |
| Lake County EMS | County EMS Dispatch | 13083 | 331b | D |
| Lake County Hospital | EMS-to-Hospital | 3548 | ddc | D |
Nearest trunked radio sites
Distances are measured from the center of Pinora.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pinora?
We do not have a fire dispatch channel listed specifically for Pinora. The county-level fire dispatch channels in the same county: Lake County Fire 154.4300 MHz, narrow FM, 118.8 PL.
What frequency does EMS or the ambulance service use in Pinora?
We do not have a EMS dispatch channel listed specifically for Pinora. The county-level EMS dispatch channels in the same county: Life EMS 155.2200 MHz, narrow FM, 103.5 PL.
Do fire departments and EMS use a trunked radio system in Pinora?
Yes. The county-level systems that cover Pinora are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pinora?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pinora?
For Pinora, start with the Chase site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.1625, 852.7875, 853.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.