About Elmwood charter Fire and EMS Frequencies
Quick answer: Trunked: Michigan's Public Safety Communications System (MPSCS), for example Leelanau County Fire talkgroup 4334 (hex 10ee).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Elmwood charter, start with the Traverse City site of Michigan's Public Safety Communications System (MPSCS), about 3 miles away. Its control channels: 853.525, 853.775 MHz.
Data updated .
Leelanau County channels that also cover Elmwood charter
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Leelanau County Fire | Leelanau County Fire – Command | 153.8300 | 162.2 PL | FMN | WPCD908 |
| Leelanau County Fire | Leelanau County Fire – Fire Ground (M/A with Grand Traverse Co.) | 154.2050 | 162.2 PL | FMN | WNLA782 |
| Leelanau County Fire | Leelanau County Fire – Fire Ground | 154.4450 | 103.5 PL | FMN | WPCD908 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Leelanau County Fire | Fire and Rescue Dispatch | 4334 | 10ee | D |
| Leelanau County Fire | Leelanau Secondary Fire / EMS | 5254 | 1486 | D |
| Leelanau County Fire | Leelanau County All Call | 5347 | 14e3 | D |
| Leelanau County Fire | Cedar Area Fire Page | 5349 | 14e5 | D |
| Leelanau County Fire | Elmwood Fire Page | 5350 | 14e6 | D |
| Leelanau County Fire | Grand Traverse Band Tribal Fire Page | 5352 | 14e8 | D |
| Leelanau County Fire | National Park Paging | 5354 | 14ea | D |
| Leelanau County Fire | Elmwood Fire / EMS Page | 5381 | 1505 | D |
| Leelanau County Fire | Leelanau County Fire – Fire Ground | 4595 | 11f3 | D |
| Leelanau County Fire | Fire Operations | 5252 | 1484 | D |
| Leelanau County EMS | EMS Operations | 4592 | 11f0 | D |
| Leelanau County EMS | Rescue Operations | 4593 | 11f1 | D |
| Leelanau County EMS | Rescue Operations | 4596 | 11f4 | D |
Nearest trunked radio sites
Distances are measured from the center of Elmwood charter.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Elmwood charter?
Yes. The county-level systems that cover Elmwood charter are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Elmwood charter?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Elmwood charter?
For Elmwood charter, start with the Traverse City site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.525, 853.775 MHz. Program a control channel first; the scanner finds the voice channels from it.