Skip to content

Conway Fire and EMS Frequencies

We do not have frequencies listed specifically for Conway in Livingston County, Michigan yet. Countywide channels for Livingston County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Owosso (Michigan's Public Safety Communications System (MPSCS)), about 12 miles away.

About Conway Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Conway: Fire and EMS 154.0100 MHz, narrow FM, 047 DPL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Livingston County Fire talkgroup 2147 (hex 863).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 16 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Conway, start with the Owosso site of Michigan's Public Safety Communications System (MPSCS), about 12 miles away. Its control channels: 853.4375, 853.9375 MHz.

Data updated .

Livingston County channels that also cover Conway

Fire Dispatch

Fire Dispatch frequencies for Livingston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSLivingston Fire/EMS Dispatch154.0100047 DPLFMNKDP347

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Livingston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hartland Township FireHartland Township Fire – Alternate (Backup to TRS)154.0100FMNKNHD976
Putnam Township FirePutnam Township Fire – Tactical Channel (Backup to TRS)154.2800123.0 PLFMNWNQW205

Hospitals & Medical

Hospitals & Medical frequencies for Livingston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
St Joseph Mercy Hospital - BrightonEMS to Hospital Notification (VHF Radio Plan – Hospital Base Station Transmits – 97.4 PL)155.3400047 DPLFMNWQNM789
St. Joseph Mercy Hospital - HowellEMS to Hospital Notification (VHF Radio Plan – Hospital Base Station Transmits – 97.4 PL)155.340082.5 PLFMNWPGJ435
St. Joseph Mercy Hospital - HowellEMS to Hospital Notification (MED-3)463.0500
In 468.0500
141.3 PLFMNWPGJ435
St. Joseph Mercy Hospital - HowellEMS to Hospital Notification (MED-6)463.1250
In 468.1250
141.3 PLFMNWPGJ435

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Livingston County FireCountywide Fire Dispatch2147863D
Livingston County FireHowell Area Fire Paging32844804cD
Livingston County FireHamburg Proprietary22288b4D
Livingston County FireHowell Proprietary22298b5D
Livingston County FireBrighton Proprietary22308b6D
Livingston County FireFowlerville Proprietary22318b7D
Livingston County FirePutnam Proprietary22328b8D
Livingston County FireHartland Proprietary22338b9D
Livingston County FireUnadilla Proprietary22348baD
Livingston County FireGreen Oak Proprietary22358bbD
Livingston County EMS/HospitalsCountywide EMS Dispatch2148864D
Livingston County EMS/HospitalsDispatch Page42322a552D
Livingston County EMS/HospitalsEMS Proprietary2136858D
Livingston County EMS/HospitalsCounty Health Department2607a2fD
Livingston County EMS/HospitalsSt. Joseph Livingston – Howell2657a61D
Livingston County EMS/HospitalsSt. Joseph Livingston – Brighton12586312aD

Nearest trunked radio sites

Distances are measured from the center of Conway.

Owosso · Michigan's Public Safety Communications System (MPSCS)
RFSS 1 · Site 4 (hex 4) · NAC 796 · about 12 mi away
Control 853.4375, 853.9375
Voice 851.1, 851.4375, 851.825, 851.9375, 852.325, 852.4375, 852.7, 852.775, 852.9375, 853.6875, 857.4125, 861.1625
Ingham County Simulcast · Michigan's Public Safety Communications System (MPSCS)
RFSS 1 · Site 27 (hex 1B) · NAC 797 · about 17 mi away
Control 851.125, 851.225, 851.725, 859.9875
Voice 769.08125, 769.66875, 770.08125, 770.43125, 771.55625, 773.05625, 773.43125, 773.68125, 773.78125, 774.40625, 856.4375, 856.9875, 857.0375, 858.4625, 858.9875, 859.4875, 859.7125
Howell · Michigan's Public Safety Communications System (MPSCS)
RFSS 2 · Site 17 (hex 11) · NAC 792 · about 17 mi away
Control 853.6125, 853.85
Voice 851.25, 851.2625, 851.7, 851.8875, 852.1625, 852.95, 853.325, 853.575, 854.3875, 854.9875, 860.9875, 861.3875, 861.6375, 861.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Conway?

We do not have a fire dispatch channel listed specifically for Conway. The county-level fire dispatch channels in the same county: Fire and EMS 154.0100 MHz, narrow FM, 047 DPL.

Do fire departments and EMS use a trunked radio system in Conway?

Yes. The county-level systems that cover Conway are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 16 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Conway?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Conway?

For Conway, start with the Owosso site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.4375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.