About Cedarville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Cedarville: Menominee County Fire 154.4150 MHz, narrow FM, 94.8 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Cedarville Fire talkgroup 6491 (hex 195b).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 1 talkgroup; Michigan's Public Safety Communications System (MPSCS): 28 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cedarville, start with the Powers site of Michigan's Public Safety Communications System (MPSCS), about 7 miles away. Its control channels: 853.4125, 853.9125 MHz.
Data updated .
Cedarville trunked talkgroups
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cedarville Fire | Cedarville Fire Department | 6491 | 195b | D |
Menominee County channels that also cover Cedarville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Menominee County Fire | Menominee County Fire/Rescue Dispatch | 154.4150 In 153.8900 | 94.8 PL | FMN | WPYS358 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Menominee County EMS | Menominee Water Rescue Paging | 6490 | 195a | D |
| Menominee County Fire | Menominee 114 Page | 6473 | 1949 | D |
| Menominee County Fire | Cedarville Twp. Fire All Call Paging | 6476 | 194c | D |
| Menominee County Fire | Daggett Twp Fire Page | 6477 | 194d | D |
| Menominee County Fire | Faithorn Twp Fire/Rescue Page | 6478 | 194e | D |
| Menominee County Fire | Gourley Twp. Fire All Call Paging | 6479 | 194f | D |
| Menominee County Fire | Harris Twp Fire Page | 6480 | 1950 | D |
| Menominee County Fire | Mellen Twp Fire Page | 6482 | 1952 | D |
| Menominee County Fire | Meyer Twp Fire Page | 6485 | 1955 | D |
| Menominee County Fire | Ingallston Twp. Fire Paging | 6486 | 1956 | D |
| Menominee County Fire | Nadeau Twp Fire Page | 6487 | 1957 | D |
| Menominee County Fire | Spaulding Twp Fire Page | 6488 | 1958 | D |
| Menominee County Fire | Stephenson Twp Fire Page | 6489 | 1959 | D |
| Menominee County Fire | County Fire Dispatch | 6495 | 195f | D |
| Menominee County Fire | Menominee County Search & Rescue | 6501 | 1965 | D |
| Menominee County Fire | Menominee-Ingallston Fire Department | 6324 | 18b4 | D |
| Menominee County Fire | Faithorn Township Fire Department | 6494 | 195e | D |
| Menominee County Fire | Gourley Township Fire Department | 6496 | 1960 | D |
| Menominee County Fire | Harris Township Fire Department | 6497 | 1961 | D |
| Menominee County Fire | Mellen Twp Fire Department | 6498 | 1962 | D |
| Menominee County Fire | Meyer Township Fire Department | 6499 | 1963 | D |
| Menominee County Fire | Nadeau Township Fire Department | 6500 | 1964 | D |
| Menominee County Fire | Spalding Township Fire Department | 6502 | 1966 | D |
| Menominee County EMS | Menominee County EMS – Dispatch | 5164 | 142c | D |
| Menominee County EMS | Mid County 114 Stephenson Twp Based Rescue Squad Page | 6472 | 1948 | D |
| Menominee County EMS | EMS 114 Page | 6474 | 194a | D |
| Menominee County EMS | 121 EMS Hermansville Rescue Squad Page | 6475 | 194b | D |
| Menominee County EMS | County EMS Dispatch | 6493 | 195d | D |
Nearest trunked radio sites
Distances are measured from the center of Cedarville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Cedarville?
We do not have a fire dispatch channel listed specifically for Cedarville. The county-level fire dispatch channels in the same county: Menominee County Fire 154.4150 MHz, narrow FM, 94.8 PL.
Do fire departments and EMS use a trunked radio system in Cedarville?
Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Cedarville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Cedarville?
For Cedarville, start with the Powers site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.4125, 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cedarville fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Cedarville are marked encrypted.