About Interior Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Interior: Ontonagon County Fire 155.4900 MHz, narrow FM, 114.8 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Ontonagon County Fire talkgroup 6202 (hex 183a).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Interior, start with the Kenton site of Michigan's Public Safety Communications System (MPSCS), about 3 miles away. Its control channels: 853.4625, 853.9625 MHz.
Data updated .
Ontonagon County channels that also cover Interior
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ontonagon County Fire | Ontonagon County Fire – Dispatch – Greenland Tower | 155.4900 In 155.9700 | 114.8 PL | FMN | WQPJ635 |
| Ontonagon County Fire | Ontonagon County Fire – Dispatch – Bergland Tower | 155.4900 In 155.9700 | 103.5 PL | FMN | WQPJ635 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Aspirus Ontonagon Hospital | Ambulance-to-Hospital Comms | 155.3400 | FMN | KTS677 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ontonagon County Fire | Fire/EMS Dispatch | 6202 | 183a | D |
| Ontonagon County Fire | County Fire Dispatch (Future) | 6210 | 1842 | D |
Nearest trunked radio sites
Distances are measured from the center of Interior.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Interior?
We do not have a fire dispatch channel listed specifically for Interior. The county-level fire dispatch channels in the same county: Ontonagon County Fire 155.4900 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Interior?
Yes. The county-level systems that cover Interior are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Interior?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Interior?
For Interior, start with the Kenton site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.4625, 853.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.