Skip to content

Flynn Fire and EMS Frequencies

We do not have frequencies listed specifically for Flynn in Sanilac County, Michigan yet. Countywide channels for Sanilac County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sandusky (Michigan's Public Safety Communications System (MPSCS)), about 11 miles away.

About Flynn Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Flynn: Sanilac County Fire 151.0100 MHz, NXDN48, no tone. County-level ems dispatch that covers Flynn: Marlette Community Hospital 152.0075 MHz, narrow FM, no tone; Sanilac County EMS 155.1750 MHz, narrow FM, 192.8 PL. Trunked: Michigan's Public Safety Communications System (MPSCS), for example Sanilac County Hospital talkgroup 2625 (hex a41).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Flynn, start with the Sandusky site of Michigan's Public Safety Communications System (MPSCS), about 11 miles away. Its control channels: 853.4375, 853.9375 MHz.

Data updated .

Sanilac County channels that also cover Flynn

Fire Dispatch

Fire Dispatch frequencies for Sanilac County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sanilac County FireSanilac County Fire – Dispatch151.0100
In 153.7700
NXDN48WPYF737

EMS Dispatch

EMS Dispatch frequencies for Sanilac County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marlette Community HospitalMarlette Community Hospital – Paging152.0075FMNKTL516
Sanilac County EMSSanilac County EMS – Dispatch155.1750192.8 PLFMNWYC697

EMS Talk-around

EMS Talk-around frequencies for Sanilac County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sanilac County EMSHealth Department155.1225
In 158.7675
FMNWQCC275

Hospitals & Medical

Hospitals & Medical frequencies for Sanilac County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marlette Community HospitalAmbulance-to-Hospital Comms155.3400141.3 PLFMNKTL516
McKenzie Memorial Hospital (Sandusky)Hospital to Ambulance155.3400131.8 PLFMNWPXN209

Michigan's Public Safety Communications System (MPSCS)

Michigan's Public Safety Communications System (MPSCS) talkgroups
AgencyDescriptionTalkgroupHexMode
Sanilac County HospitalMedical Control Authority2625a41D
Sanilac County HospitalEMS-to-Deckerville Community Hospital2629a45D
Sanilac County HospitalEMS-to-Marlette Regional Hospital2637a4dD
Sanilac County HospitalEMS-to-McKenzie Health System2638a4eD

Nearest trunked radio sites

Distances are measured from the center of Flynn.

Sandusky · Michigan's Public Safety Communications System (MPSCS)
RFSS 2 · Site 13 (hex D) · NAC 791 · about 11 mi away
Control 853.4375, 853.9375
Voice 851.9375, 852.4375, 852.9375, 861.5125, 861.5625, 861.9625
Lapeer County Simulcast · Michigan's Public Safety Communications System (MPSCS)
RFSS 2 · Site 25 (hex 19) · NAC 795 · about 20 mi away
Control 853.7625, 853.7875, 853.8125
Voice 851.5875, 851.8375, 852.0625, 852.3125, 852.5375, 852.5625, 852.7625, 853.0625, 853.1125, 853.35, 853.6
Caro · Michigan's Public Safety Communications System (MPSCS)
RFSS 2 · Site 16 (hex 10) · NAC 79C · about 23 mi away
Control 853.55, 853.9625
Voice 852.1875, 852.4625, 852.9625, 853.25, 853.4625, 861.0375, 861.0875, 861.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Flynn?

We do not have a fire dispatch channel listed specifically for Flynn. The county-level fire dispatch channels in the same county: Sanilac County Fire 151.0100 MHz, NXDN48, no tone.

What frequency does EMS or the ambulance service use in Flynn?

We do not have a EMS dispatch channel listed specifically for Flynn. The county-level EMS dispatch channels in the same county: Marlette Community Hospital 152.0075 MHz, narrow FM, no tone; Sanilac County EMS 155.1750 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Flynn?

Yes. The county-level systems that cover Flynn are Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Flynn?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Flynn?

For Flynn, start with the Sandusky site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 853.4375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.