About Doyle Fire and EMS Frequencies
Quick answer: Trunked: Michigan's Public Safety Communications System (MPSCS), for example Doyle Fire talkgroup 6452 (hex 1934).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Michigan's Public Safety Communications System (MPSCS): 1 talkgroup; Michigan's Public Safety Communications System (MPSCS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Doyle, start with the Gould City site of Michigan's Public Safety Communications System (MPSCS), about 12 miles away. Its control channels: 852.4, 853.9 MHz.
Data updated .
Doyle trunked talkgroups
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Doyle Fire | Doyle Fire/First Responders Paging | 6452 | 1934 | D |
Schoolcraft County channels that also cover Doyle
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Schoolcraft Memorial Hospital | Ambulance-to-Hospital | 155.3400 | FMN | KNGM209 |
Michigan's Public Safety Communications System (MPSCS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Schoolcraft County Fire | Fire/EMS Dispatch | 5118 | 13fe | D |
| Schoolcraft County Fire | County All-Call | 6433 | 1921 | D |
| Schoolcraft County Fire | Germfask First Responder Paging | 6451 | 1933 | D |
| Schoolcraft County Fire | Schoolcraft County Fire – Fire Ground | 5166 | 142e | D |
| Schoolcraft County Fire | Schoolcraft County Fire – Fire Ground | 5167 | 142f | D |
| Schoolcraft County EMS | EMS Operations | 5117 | 13fd | D |
| Schoolcraft County Hospital | Schoolcraft Memorial Hospital EMS-to-Hospital | 6164 | 1814 | D |
Nearest trunked radio sites
Distances are measured from the center of Doyle.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Doyle?
Yes. Fire and EMS talkgroups are listed for Michigan's Public Safety Communications System (MPSCS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Doyle?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Doyle?
For Doyle, start with the Gould City site of Michigan's Public Safety Communications System (MPSCS). Its control channels are 852.4, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Doyle fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Doyle are marked encrypted.