About Holmesville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Holmesville: Becker County Fire 154.4000 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Holmesville: Becker County EMS 155.0250 MHz, FM, 203.5 PL; White Earth Reservation EMS 155.3550 MHz, narrow FM, 186.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Becker County Fire talkgroup 49513 (hex c169).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Holmesville, start with the Rochert site of Allied Radio Matrix for Emergency Response (ARMER), about 3 miles away. Its control channels: 851.975, 852.475 MHz.
Data updated .
Becker County channels that also cover Holmesville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Becker County Fire | County Paging | 154.4000 In 150.8050 | 123.0 PL | FMN | KAA358 |
| Becker County Fire | County Fire Depts. | 154.4000 In 150.8050 | NAC 800 | P25 | KAA358 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Towns Fire | Lake Park Fire | 154.0550 | CSQ | FMN | WNYW311 |
| Towns Fire | Calloway Fire | 154.2275 | NAC 275 | P25 | WQGJ377 |
| Towns Fire | Lake Park | 155.0550 | FMN | WPKF727 | |
| Towns Fire | Wolf Lake Fire | 155.2500 | NAC 125 | P25 | WQIU361 |
| Towns Fire | Frazee Fire | 155.8350 | NAC 835 | P25 | WPGY663 |
| Towns Fire | Audobon Fire / City Services | 155.9400 | CSQ | FM | WPMY275 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Becker County EMS | Becker Co. EMS – ARMER TG 49513 | 155.0250 In 153.7850 | 203.5 PL | FM | WNLB466 |
| White Earth Reservation EMS | White Earth EMS | 155.3550 | 186.2 PL | FMN | WXP443 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| White Earth Reservation EMS | White Earth EMS | 156.2250 In 159.2175 | 107.2 PL | FMN | WQQS282 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Becker County Fire | Becker Fire Dispatch | 49513 | c169 | D |
| Becker County Fire | Fire and EMS Paging | 49526 | c176 | D |
| Becker County Fire | Becker Fire – Tactical | 49514 | c16a | D |
| Becker County Fire | Becker EMS – Tactical | 49516 | c16c | D |
| Becker County Fire | Becker County Fire – Tactical Channel | 49522 | c172 | D |
| Becker County Fire | Becker County Fire – Tactical Channel | 49527 | c177 | D |
| Becker County Fire | Becker Fire/EMS Administration | 49517 | c16d | D |
| Becker County EMS | Becker EMS Dispatch | 49515 | c16b | D |
Nearest trunked radio sites
Distances are measured from the center of Holmesville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Holmesville?
We do not have a fire dispatch channel listed specifically for Holmesville. The county-level fire dispatch channels in the same county: Becker County Fire 154.4000 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Holmesville?
We do not have a EMS dispatch channel listed specifically for Holmesville. The county-level EMS dispatch channels in the same county: Becker County EMS 155.0250 MHz, FM, 203.5 PL; White Earth Reservation EMS 155.3550 MHz, narrow FM, 186.2 PL.
Do fire departments and EMS use a trunked radio system in Holmesville?
Yes. The county-level systems that cover Holmesville are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Holmesville?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Holmesville?
For Holmesville, start with the Rochert site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.975, 852.475 MHz. Program a control channel first; the scanner finds the voice channels from it.