Skip to content

Cormant Fire and EMS Frequencies

We do not have frequencies listed specifically for Cormant in Beltrami County, Minnesota yet. Countywide channels for Beltrami County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Suam (Allied Radio Matrix for Emergency Response (ARMER)), about 6 miles away.

About Cormant Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cormant: Beltrami County Fire 155.6850 MHz, narrow FM, 114 DPL. County-level ems dispatch that covers Cormant: Beltrami County EMS 155.0400 MHz, narrow FM, 162.2 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Beltrami County Fire talkgroup 51567 (hex c96f).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cormant, start with the Suam site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 851.2125, 854.1125 MHz.

Data updated .

Beltrami County channels that also cover Cormant

Fire Dispatch

Fire Dispatch frequencies for Beltrami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Beltrami County FireBeltrami County Fire – Paging155.6850
In 154.7550
114 DPLFMNWPYB806

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Beltrami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Towns FireBlackduck Fire154.1300123.0 PLFMNWYK585
Towns FireKelliher Fire154.1300FMNKLS693
Towns FireKelliher Fire154.3250FMNKLS693

EMS Dispatch

EMS Dispatch frequencies for Beltrami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Beltrami County EMSNorth Mem. Health Care – Air Care155.0400162.2 PLFMNWQHU386
Beltrami County EMSSanford Lifeflight Operations453.1625
In 458.1625
141.3 PLFMNWNGG480

Hospitals & Medical

Hospitals & Medical frequencies for Beltrami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Beltrami County HospitalNorth County Hospital155.3250114.8 PLFMNKEC981
Beltrami County HospitalIndian Hospital Public Health Service-Red Lake155.3250123.0 PLFMNKNCT744

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Beltrami County FireCounty Fire Main51567c96fD
Beltrami County EMSEMS 1 Dispatch51535c94fD
Beltrami County EMSEMS 2 Dispatch51536c950D
Beltrami County EMSDispatch Bemidji51537c951D
Beltrami County EMSDispatch Kelliher51538c952D
Beltrami County EMSDispatch Debs51539c953D
Beltrami County EMSDispatch Jelle51540c954D

Nearest trunked radio sites

Distances are measured from the center of Cormant.

Suam · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 81 (hex 51) · about 6 mi away
Control 851.2125, 854.1125
Voice 851.9875, 852.725, 853.4125
Hines · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 78 (hex 4E) · NAC 40D · about 14 mi away
Control 852.875, 859.2375
Voice 853.3875, 856.2375, 857.9375
Northome · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 5 · Site 25 (hex 19) · NAC 406 · about 14 mi away
Control 851.375, 852.0375
Voice 853.1125, 853.475, 854.0625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cormant?

We do not have a fire dispatch channel listed specifically for Cormant. The county-level fire dispatch channels in the same county: Beltrami County Fire 155.6850 MHz, narrow FM, 114 DPL.

What frequency does EMS or the ambulance service use in Cormant?

We do not have a EMS dispatch channel listed specifically for Cormant. The county-level EMS dispatch channels in the same county: Beltrami County EMS 155.0400 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Cormant?

Yes. The county-level systems that cover Cormant are Fire and EMS talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cormant?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cormant?

For Cormant, start with the Suam site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.2125, 854.1125 MHz. Program a control channel first; the scanner finds the voice channels from it.